EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

FeCo Alloy-Decorated Proton-Conducting Perovskite Oxide as an Efficient and Low-Cost Ammonia Decomposition Catalyst

Xueyan Zhao, Qingfeng Teng, Haoliang Tao, Wenqiang Tang, Yiwei Chen, Bofang Zhou, Junkang Sang, Senrui Huang, Wanbing Guan, Hua Li, Liangzhu Zhu

Catalysts · 23.11.2024 · 14 (12) · 850

DOI: 10.3390/catal14120850 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Catalysts, online erschienen am 23.11.2024. Verfasst von Xueyan Zhao und 10 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ningbo Municipal People’s Government, Chinese Academy of Science.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ammonia is known as an alternative hydrogen supplier because of its high hydrogen content and convenient storage and transport. Hydrogen production from ammonia decomposition also provides a source of hydrogen for fuel cells. While catalysts composed of ruthenium metal atop various support materials have proven to be effective for ammonia decomposition, non-precious-metal-based catalysts are attracting more attention due to desires to reduce costs. We prepared a series of Fe, Co, Ni, Mn, and Cu monometallic catalysts and their alloys as catalysts over proton-conducting ceramics via the impregnation method as precious-metal-free ammonia decomposition catalysts. While Co and Ni showed superior performance compared to Fe, Mn, and Cu on a BaZr0.1Ce0.7Y0.1Yb0.1O3−б (BZCYYb) support as an ammonia decomposition catalyst, the cost of Fe is much lower than that of other metals. Alloying Fe with Co can significantly increase the conversion and stability and lower the overall cost of materials. The measured ammonia decomposition rate of FeCo/BZCYYb reached 100% at 600 °C, and the ammonia decomposition rate was almost unchanged during the long-term test of 200 h, which reveals its good catalytic activity for ammonia decomposition and thermal stability. When the metallic catalyst remained unchanged, BZCYYb also exhibited better performance compared to other commonly used oxide supports. Finally, when ammonia cracked using our alloy catalyst was fed to solid oxide fuel cells (SOFCs), the peak power densities were very close to that achieved with a simulated fully cracked gas stream, i.e., 75% H2 + 25% N2, thus proving the effectiveness of this new type of ammonia decomposition catalyst.

Förderung

  • Ningbo Municipal People’s Government
  • Chinese Academy of Science

Zitieren

APA

Zhao, X., Teng, Q., Tao, H., Tang, W., Chen, Y., Zhou, B., Sang, J., Huang, S., Guan, W., Li, H., & Zhu, L. (2024). FeCo Alloy-Decorated Proton-Conducting Perovskite Oxide as an Efficient and Low-Cost Ammonia Decomposition Catalyst. Catalysts, 14(12), 850. https://doi.org/10.3390/catal14120850

Vancouver

Zhao X, Teng Q, Tao H, Tang W, Chen Y, Zhou B, et al. FeCo Alloy-Decorated Proton-Conducting Perovskite Oxide as an Efficient and Low-Cost Ammonia Decomposition Catalyst. Catalysts. 2024;14(12):850. doi:10.3390/catal14120850

BibTeX
@article{Zhao2024,
  author = {Zhao, Xueyan and Teng, Qingfeng and Tao, Haoliang and Tang, Wenqiang and Chen, Yiwei and Zhou, Bofang and Sang, Junkang and Huang, Senrui and Guan, Wanbing and Li, Hua and Zhu, Liangzhu},
  title = {FeCo Alloy-Decorated Proton-Conducting Perovskite Oxide as an Efficient and Low-Cost Ammonia Decomposition Catalyst},
  journal = {Catalysts},
  year = {2024},
  volume = {14},
  number = {12},
  pages = {850},
  doi = {10.3390/catal14120850}
}
Kostenlos starten →