EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Oxidative Steam Reforming of Methanol over Cu-Based Catalysts

Matteo Tommasi, Davide Ceriotti, Alice Gramegna, Simge Naz Degerli, Gianguido Ramis, Ilenia Rossetti

Catalysts · 28.10.2024 · 14 (11) · 759

DOI: 10.3390/catal14110759 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Catalysts, online erschienen am 28.10.2024. Verfasst von Matteo Tommasi und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Several Cu and Ni-based catalysts were synthetized over Ce-based supports, either pure or mixed with different amounts of alumina (1:2 and 1:3 mol/mol). Different metal loadings (10–40 wt%) and preparation methods (wet impregnation, co-precipitation, and flame-spray pyrolysis—FSP) were compared for the oxidative steam reforming of methanol. Characterization of the catalysts has been performed, e.g., through XRD, BET, XPS, TPR, SEM, and EDX analyses. All the catalysts have been tested in a bench-scale continuous setup. The hydrogen yield and methanol conversion obtained have been correlated with the operating conditions, metal content, crystallinity of the catalyst particles, total surface area, and with the interaction of the metal with the support. A Cu loading of 20% wt/wt was optimal, while the presence of alumina was not beneficial, decreasing catalyst activity at low temperatures compared with catalysts supported on pure CeO2. Ni-based catalysts were a possible alternative, but the activity towards the methanation reaction at relatively high temperatures decreased inevitably the hydrogen yield. Durability and deactivation tests showed that the best-performing catalyst, 20% wt. Cu/CeO2 prepared through coprecipitation was stable for a long period of time. Full methanol conversion was achieved at 280 °C, and the highest yield of H2 was ca. 80% at 340 °C, higher than the literature data.

Zitieren

APA

Tommasi, M., Ceriotti, D., Gramegna, A., Degerli, S. N., Ramis, G., & Rossetti, I. (2024). Oxidative Steam Reforming of Methanol over Cu-Based Catalysts. Catalysts, 14(11), 759. https://doi.org/10.3390/catal14110759

Vancouver

Tommasi M, Ceriotti D, Gramegna A, Degerli SN, Ramis G, Rossetti I. Oxidative Steam Reforming of Methanol over Cu-Based Catalysts. Catalysts. 2024;14(11):759. doi:10.3390/catal14110759

BibTeX
@article{Tommasi2024,
  author = {Tommasi, Matteo and Ceriotti, Davide and Gramegna, Alice and Degerli, Simge Naz and Ramis, Gianguido and Rossetti, Ilenia},
  title = {Oxidative Steam Reforming of Methanol over Cu-Based Catalysts},
  journal = {Catalysts},
  year = {2024},
  volume = {14},
  number = {11},
  pages = {759},
  doi = {10.3390/catal14110759}
}
Kostenlos starten →