EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Carbon-Coated Ni-Fe Nanocatalysts: Bridging the Gap in Cinnamaldehyde Hydrogenation Performance and Durability

Yuhang Cai, Anping Yin, Jianxiang Zhang, Jiatai Wang, Xiaofei Qin, Yibo Yang, Gaolei Qin, Xiaodong Sun, Peng He, Yong Yang

Catalysts · 28.11.2023 · 13 (12) · 1474

DOI: 10.3390/catal13121474 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Catalysts, online erschienen am 28.11.2023. Verfasst von Yuhang Cai und 9 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Major Science and Technology Project of Ordos.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focuses on the synthesis and evaluation of carbon−coated Ni−Fe alloy catalysts (NiFex@C, x = 0, 0.3, 0.7, 1.1) for the hydrogenation of cinnamaldehyde. The catalysts were characterized using Transmission Electron Microscopy (TEM), X-ray Diffraction (XRD), Raman spectroscopy, and X-ray Photoelectron Spectroscopy (XPS). The introduction of Fe was found to increase the average particle size of the bimetallic catalysts compared to the monometallic Ni@C. Ni existed in both metallic and oxide states, while Fe exhibited multiple oxidation states in the bimetallic catalysts. The carbon layer, approximately 2–3 nm thick, was confirmed to envelop the alloy particles. The catalytic performance of carbon−coated Ni−Fe alloy catalysts indicated that the addition of Fe to Ni@C enhanced the selectivity towards hydrocinnamaldehyde (HCAL), with NiFe0.7@C showing the highest selectivity (~88.6%) but at a reduced conversion rate. The carbon layer played a pivotal role in the stability and reusability of the catalysts. NiFe0.7@C maintained consistent performance over multiple reaction cycles, while NiFe0.7 NPs (without a carbon layer) exhibited significant deactivation. Both catalysts displayed strong magnetism, facilitating easy separation from the reaction mixture. This study sheds light on the significance of the carbon layer in bimetallic catalysts and provides valuable insights for designing efficient catalysts for hydrogenation processes.

Förderung

  • National Natural Science Foundation of China
  • Major Science and Technology Project of Ordos

Zitieren

APA

Cai, Y., Yin, A., Zhang, J., Wang, J., Qin, X., Yang, Y., Qin, G., Sun, X., He, P., & Yang, Y. (2023). Carbon-Coated Ni-Fe Nanocatalysts: Bridging the Gap in Cinnamaldehyde Hydrogenation Performance and Durability. Catalysts, 13(12), 1474. https://doi.org/10.3390/catal13121474

Vancouver

Cai Y, Yin A, Zhang J, Wang J, Qin X, Yang Y, et al. Carbon-Coated Ni-Fe Nanocatalysts: Bridging the Gap in Cinnamaldehyde Hydrogenation Performance and Durability. Catalysts. 2023;13(12):1474. doi:10.3390/catal13121474

BibTeX
@article{Cai2023,
  author = {Cai, Yuhang and Yin, Anping and Zhang, Jianxiang and Wang, Jiatai and Qin, Xiaofei and Yang, Yibo and Qin, Gaolei and Sun, Xiaodong and He, Peng and Yang, Yong},
  title = {Carbon-Coated Ni-Fe Nanocatalysts: Bridging the Gap in Cinnamaldehyde Hydrogenation Performance and Durability},
  journal = {Catalysts},
  year = {2023},
  volume = {13},
  number = {12},
  pages = {1474},
  doi = {10.3390/catal13121474}
}
Kostenlos starten →