Interpretable Machine Learning for Coupled Strength–Flowability Analysis and Screening of UHPC Based on Orthogonal Experiments
Buildings · 19.11.2026 · 16 (22) · 4623
DOI: 10.3390/buildings16224623 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 19.11.2026. Verfasst von Haoran Guo und 4 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Program of Hebei Natural Science Foundation, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
An orthogonal experimental design was used to systematically investigate the combined effects of four UHPC mix-design factors—silica fume content, fly ash content, quartz powder content, and sand-to-binder ratio—on compressive strength at 3 d following steam curing and 28-day standard curing, as well as on fresh-state flowability. A total of 900 mixture-proportion records that passed the absolute-volume closure check were compiled, of which 556 fell within the adopted workability range of 200–250 mm. A dual-response machine-learning framework incorporating physical feasibility screening was developed; six regression models were compared, and SHAP was used for model interpretation. In the orthogonal experiments, silica fume content exhibited the largest response ranges for both early-age strength and flowability within the investigated factor levels. Mixture A4 achieved the highest measured compressive strengths of 129.76 MPa at 3 d following steam curing and 119.42 MPa after 28-day standard curing, but its flow diameter of 182 mm fell outside the adopted workability window of 200–250 mm. Under this workability constraint, A6 achieved the highest 3-day steam-cured strength among the workable mixtures, and A2 had the highest 28-day standard-cured strength. The results show that the highest-strength tested mixture is not necessarily the mixture with the best strength–flowability balance. LightGBM provided the best prediction for flowability, with a test-set coefficient of determination (R2) of 0.9147 and root mean square error (RMSE) of 7.9203 mm; the gradient boosting model provided the best prediction for 28-day compressive strength, with R2 of 0.8597 and RMSE of 5.9846 MPa. SHAP analysis indicated that the water-to-binder ratio (w/b) exhibited the largest global attribution to predicted strength, with higher values generally associated with lower predicted strength. Higher values of paste volume fraction (Vp), w/b, and superplasticizer-solids-to-binder ratio (SPs/B) were generally associated with increased predicted flowability. These findings highlight the need to consider strength and flowability jointly in UHPC mix design.
Förderung
- Key Program of Hebei Natural Science Foundation
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Guo, H., Zhao, Z., Han, Y., Li, X., & Li, D. (2026). Interpretable Machine Learning for Coupled Strength–Flowability Analysis and Screening of UHPC Based on Orthogonal Experiments. Buildings, 16(22), 4623. https://doi.org/10.3390/buildings16224623
Vancouver
Guo H, Zhao Z, Han Y, Li X, Li D. Interpretable Machine Learning for Coupled Strength–Flowability Analysis and Screening of UHPC Based on Orthogonal Experiments. Buildings. 2026;16(22):4623. doi:10.3390/buildings16224623
BibTeX
@article{Guo2026,
author = {Guo, Haoran and Zhao, Zhengguang and Han, Yifan and Li, Xingyu and Li, Dong},
title = {Interpretable Machine Learning for Coupled Strength–Flowability Analysis and Screening of UHPC Based on Orthogonal Experiments},
journal = {Buildings},
year = {2026},
volume = {16},
number = {22},
pages = {4623},
doi = {10.3390/buildings16224623}
}
EUVIMED