EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Shear Redistribution on Local Shear Buckling in Non-Prismatic Cantilever Composite Girders with Corrugated Steel Webs

Yuanguang Bai, Shutao Xu, Yong Zhang, Jixiang Chen, Sheng Li, Xiao Kong, Chenguang Wang, Xiaolong Su

Buildings · 18.11.2026 · 16 (22) · 4608

DOI: 10.3390/buildings16224608 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 18.11.2026. Verfasst von Yuanguang Bai und 7 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Lanzhou Youth Science and Technology Talent Project, Gansu Province Higher Education Teacher Innovation Fund Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Research on the shear buckling of composite girders with corrugated steel webs (CGCSWs) has long been confined to prismatic members, so that both the buckling mechanism and the analytical critical stress of non-prismatic girders have remained framed within the prismatic assumption. This study examines how, in non-prismatic girders, the vertical component of the axial force in the inclined concrete bottom flange participates in resisting the external shear and thereby drives a longitudinal redistribution of the shear flow along the span, which can shift the section of maximum web shear stress and the likely initiation site of shear buckling away from the fixed-end support toward the loading region. Starting from vertical section equilibrium, an explicit force-path relation is derived and used to reassess the critical location, and the local critical shear buckling stress is evaluated with an energy-based approach that incorporates the rate of section-height variation along the span. An idealized finite-element assessment and a qualitative comparison with a reported test observation are used to check the direction of the predicted redistribution and critical-section migration. For the studied geometry, the results indicate that current design practice may misidentify the critical location and may overestimate the local buckling demand at the actual critical section. However, the evidence supports a scoped reassessment rather than a general design rule. The study provides a theoretical basis and identifies the experimental and parametric work required before design application.

Förderung

  • Lanzhou Youth Science and Technology Talent Project
  • Gansu Province Higher Education Teacher Innovation Fund Project

Zitieren

APA

Bai, Y., Xu, S., Zhang, Y., Chen, J., Li, S., Kong, X., Wang, C., & Su, X. (2026). Effect of Shear Redistribution on Local Shear Buckling in Non-Prismatic Cantilever Composite Girders with Corrugated Steel Webs. Buildings, 16(22), 4608. https://doi.org/10.3390/buildings16224608

Vancouver

Bai Y, Xu S, Zhang Y, Chen J, Li S, Kong X, et al. Effect of Shear Redistribution on Local Shear Buckling in Non-Prismatic Cantilever Composite Girders with Corrugated Steel Webs. Buildings. 2026;16(22):4608. doi:10.3390/buildings16224608

BibTeX
@article{Bai2026,
  author = {Bai, Yuanguang and Xu, Shutao and Zhang, Yong and Chen, Jixiang and Li, Sheng and Kong, Xiao and Wang, Chenguang and Su, Xiaolong},
  title = {Effect of Shear Redistribution on Local Shear Buckling in Non-Prismatic Cantilever Composite Girders with Corrugated Steel Webs},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {4608},
  doi = {10.3390/buildings16224608}
}
Kostenlos starten →