EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Moving-Load Vibration of Asymmetric U-Shaped Thin-Walled Beams: Eccentricity and Warping Effects

Yubei Liao, Xiaoyong Lv

Buildings · 18.11.2026 · 16 (22) · 4605

DOI: 10.3390/buildings16224605 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 18.11.2026. Verfasst von Yubei Liao und 1 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Open Foundation of National Engineering Research Center of High-speed Railway Construction Technology, Key Project of Hunan Provincial Department of Education.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper quantifies how much each source of cross-sectional asymmetry contributes to the coupled vibration of an asymmetric U-shaped thin-walled beam under a moving harmonic load. The triply coupled structural equations are adopted from an existing framework, but the moving-load torque is re-derived so that its lever arms follow the rotation of the section and the translation of the shear center. The released torque departs from its constant-arm value by up to 10.6%, and 97% of that departure comes from the translation of the shear center beneath a load whose line of action is fixed in space, a channel that formulations releasing only the section rotation do not contain. It nevertheless shifts the peak responses by less than 0.1%, even in the limit where it is the only load torque acting, so the constant-arm form is accurate here with a measured margin. Sectional properties are obtained by integrating the wall geometry. Applied alone, the two shear-center offsets contribute 42.8% and 39.1% of the combined torsional increment, although one is 3.4 times the other, and together they exceed the sum of their separate effects by 22.0%. Warping carries 80.2% of the torsional stiffness at the 12 m reference span, so restoring the warping restraint raises the torsion-dominated frequency branch by 118.1% while the bending-dominated branches move by less than 3%. The whole span dependence is carried by a single length of 24.2 m, and every span examined falls below it. Across a family of seven buildable sections, the combined eccentricity falls while the peak torsional rotation rises by a factor of 13.9. For open sections of these proportions, the torsional demand is set by the warping restraint and by both offsets acting jointly, not by the larger offset alone.

Förderung

  • National Natural Science Foundation of China
  • Open Foundation of National Engineering Research Center of High-speed Railway Construction Technology
  • Key Project of Hunan Provincial Department of Education

Zitieren

APA

Liao, Y., & Lv, X. (2026). Moving-Load Vibration of Asymmetric U-Shaped Thin-Walled Beams: Eccentricity and Warping Effects. Buildings, 16(22), 4605. https://doi.org/10.3390/buildings16224605

Vancouver

Liao Y, Lv X. Moving-Load Vibration of Asymmetric U-Shaped Thin-Walled Beams: Eccentricity and Warping Effects. Buildings. 2026;16(22):4605. doi:10.3390/buildings16224605

BibTeX
@article{Liao2026,
  author = {Liao, Yubei and Lv, Xiaoyong},
  title = {Moving-Load Vibration of Asymmetric U-Shaped Thin-Walled Beams: Eccentricity and Warping Effects},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {4605},
  doi = {10.3390/buildings16224605}
}
Kostenlos starten →