Inelastic Buckling Analysis of Cold-Formed Steel Built-Up Sections with Residual Stresses Using a Compound Spline Finite Strip Method
Buildings · 17.11.2026 · 16 (22) · 4581
DOI: 10.3390/buildings16224581 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 17.11.2026. Verfasst von Huan Liu und 2 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Youth Fund of the Hunan Natural Science Foundation, Hunan Province Educational Commission Project.
Abstract (Originalsprache)
The finite strip method is widely used for the buckling analysis of cold-formed steel sections. However, existing finite strip methods make it difficult to account for the effects of material nonlinearity and residual stresses on the buckling behavior of built-up sections. In this study, a compound spline finite strip method is developed for the inelastic buckling analysis of built-up sections. Material nonlinearity is incorporated based on the deformation theory of plasticity. The effect of residual stresses is considered by modifying the material stress–strain relationship. The generalized eigenvalue equation is formulated based on the principle of minimum potential energy. An iterative algorithm is presented to determine the critical inelastic buckling stress. The proposed method is validated against results obtained using alternative numerical methods. The inelastic buckling behavior of typical built-up I-sections and box sections is investigated in detail. For typical built-up I-sections and box sections, both material nonlinearity and residual stresses reduce the local buckling stress, with the effect of material nonlinearity being more pronounced. In contrast, the effects of material nonlinearity and residual stresses on the global buckling stress are insignificant. The method can serve as a useful numerical tool for the optimal structural design of cold-formed steel built-up sections.
Förderung
- Youth Fund of the Hunan Natural Science Foundation
- Hunan Province Educational Commission Project
Zitieren
APA
Liu, H., Deng, L., & Shen, L. (2026). Inelastic Buckling Analysis of Cold-Formed Steel Built-Up Sections with Residual Stresses Using a Compound Spline Finite Strip Method. Buildings, 16(22), 4581. https://doi.org/10.3390/buildings16224581
Vancouver
Liu H, Deng L, Shen L. Inelastic Buckling Analysis of Cold-Formed Steel Built-Up Sections with Residual Stresses Using a Compound Spline Finite Strip Method. Buildings. 2026;16(22):4581. doi:10.3390/buildings16224581
BibTeX
@article{Liu2026,
author = {Liu, Huan and Deng, Lu and Shen, Lian},
title = {Inelastic Buckling Analysis of Cold-Formed Steel Built-Up Sections with Residual Stresses Using a Compound Spline Finite Strip Method},
journal = {Buildings},
year = {2026},
volume = {16},
number = {22},
pages = {4581},
doi = {10.3390/buildings16224581}
}
EUVIMED