Hydration Microstructure Three-Dimensional Modeling and Mechanical Performance of Slag-Based Geopolymers
Buildings · 17.11.2026 · 16 (22) · 4579
DOI: 10.3390/buildings16224579 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 17.11.2026. Verfasst von Luxia Song und 7 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science Research Project of Hebei Education Department.
Abstract (Originalsprache)
Aiming to combat the shortage of existing pavement repair materials and the current situation in the field of transport pavements, finding a high-quality, environmentally friendly, fast-setting and -hardening, high-strength and excellent-durability pavement repair material is an urgent issue that needs to be addressed immediately. In this research, based on the dynamic characterization of the early hydration of geopolymer, a microstructural three-dimensional model of a slag-based geopolymer with fast consolidation and high early strength was established using HYMOSTRUC, revealing its hydration reaction mechanism and characterizing its early microstructural evolution. The three-dimensional model of the hydration microstructure showed that with an increase in reaction time, the slag particles gradually dissolved, and the alkali-activated gel continuously accumulated and filled the original pores; the simulation revealed that alkali-activated gel gradually accumulates and forms a network structure, which causes the slag-based geopolymer to densify gradually. By optimizing the mix ratio, we explored the characterization of microstructural evolution and the developmental patterns of the mechanical performance of the composite-modified slag-based geopolymer, and we comprehensively demonstrated the patterns of the influence of material composition and hydration microstructure on mechanical performance. The optimum mix reached a 28 d compressive strength of 96.9 MPa; composite addition of 10%SF + 10%MK increased the 3/7/28 d compressive strength by 11.02/21.14/13.25 MPa and reduced the 28 d autogenous shrinkage from 1.6% to 0.8%.
Förderung
- National Natural Science Foundation of China
- Science Research Project of Hebei Education Department
Zitieren
APA
Song, L., Long, F., Wang, S., Duan, P., Wang, L., Hao, X., Wang, A., & Lv, T. (2026). Hydration Microstructure Three-Dimensional Modeling and Mechanical Performance of Slag-Based Geopolymers. Buildings, 16(22), 4579. https://doi.org/10.3390/buildings16224579
Vancouver
Song L, Long F, Wang S, Duan P, Wang L, Hao X, et al. Hydration Microstructure Three-Dimensional Modeling and Mechanical Performance of Slag-Based Geopolymers. Buildings. 2026;16(22):4579. doi:10.3390/buildings16224579
BibTeX
@article{Song2026,
author = {Song, Luxia and Long, Fei and Wang, Sili and Duan, Ping and Wang, Longxuan and Hao, Xiaofei and Wang, An and Lv, Tong},
title = {Hydration Microstructure Three-Dimensional Modeling and Mechanical Performance of Slag-Based Geopolymers},
journal = {Buildings},
year = {2026},
volume = {16},
number = {22},
pages = {4579},
doi = {10.3390/buildings16224579}
}
EUVIMED