EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Calculation Model for Jacking Force of Large-Diameter Reinforced Concrete Pipe Jacking Considering Slurry Lubrication Evolution and Effective Contact Pressure Around the Pipe

Kaiqi Li, Chengju Zhang, Tianshuo Xu, Jiahao Mei, Peng Zhang

Buildings · 17.11.2026 · 16 (22) · 4578

DOI: 10.3390/buildings16224578 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 17.11.2026. Verfasst von Kaiqi Li und 4 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Peng Zhang.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the limitations of traditional jacking force calculation methods in long-distance large-diameter reinforced concrete pipe jacking projects, specifically their insufficient consideration of slurry lubrication evolution and the actual pipe–soil contact state, this study conducts field monitoring and theoretical analysis based on the tailwater discharge pipe jacking project at the Tangxun Lake Wastewater Treatment Plant in Wuhan. Based on the evolutionary characteristics of grouting pressure, circumferential pressure, and unit frictional resistance, the jacking process is divided into three working conditions: no slurry lubrication, gradual development of slurry lubrication, and fully developed slurry lubrication. By introducing the counteracting effect of slurry pressure on traditional circumferential water and soil pressures, a model for effective contact pressure around the pipe is established. Furthermore, the pipe–soil contact range under uplift and subsidence states is determined by analyzing the relationship between segment buoyancy and self-weight. On this basis, the H-B rheological model is introduced to describe the frictional characteristics at the pipe-grout interface, and calculation methods for side frictional resistance and total jacking force under different lubrication conditions are developed. Engineering validation results show that the calculation errors of the proposed model at the ends of three main strata, namely mucky silty clay, silty clay and clay, and strongly weathered muddy siltstone, are −2.2%, 6.9%, and −8.7%, respectively. These errors are significantly lower than the 134.2%, 242.1%, and 258.5% errors observed with standard empirical methods. ABAQUS numerical simulations further indicate that the simulated jacking force under grouting conditions is 5237.6 kN, with an error of 4.19% compared to the measured value of 5026.6 kN. The errors between simulated and measured values in different typical jacking sections are basically controlled within ±15%. The research results demonstrate that considering the counteracting effect of slurry pressure on circumferential water and soil pressures, as well as the evolution of lubrication states, can more reasonably reflect the variation laws of circumferential frictional resistance and jacking force during long-distance pipe jacking construction.

Förderung

  • National Natural Science Foundation of China
  • Peng Zhang

Zitieren

APA

Li, K., Zhang, C., Xu, T., Mei, J., & Zhang, P. (2026). Calculation Model for Jacking Force of Large-Diameter Reinforced Concrete Pipe Jacking Considering Slurry Lubrication Evolution and Effective Contact Pressure Around the Pipe. Buildings, 16(22), 4578. https://doi.org/10.3390/buildings16224578

Vancouver

Li K, Zhang C, Xu T, Mei J, Zhang P. Calculation Model for Jacking Force of Large-Diameter Reinforced Concrete Pipe Jacking Considering Slurry Lubrication Evolution and Effective Contact Pressure Around the Pipe. Buildings. 2026;16(22):4578. doi:10.3390/buildings16224578

BibTeX
@article{Li2026,
  author = {Li, Kaiqi and Zhang, Chengju and Xu, Tianshuo and Mei, Jiahao and Zhang, Peng},
  title = {Calculation Model for Jacking Force of Large-Diameter Reinforced Concrete Pipe Jacking Considering Slurry Lubrication Evolution and Effective Contact Pressure Around the Pipe},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {4578},
  doi = {10.3390/buildings16224578}
}
Kostenlos starten →