Explainable Machine Learning for Multi-Response Structural Performance Prediction of Additively Manufactured PrinTimber Composite Beams
Buildings · 17.11.2026 · 16 (22) · 4576
DOI: 10.3390/buildings16224576 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 17.11.2026. Verfasst von Hojat Hematabadi und 1 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation.
Abstract (Originalsprache)
Additively manufactured structural composites exhibit geometry-dependent responses that require both accurate prediction and defensible validation. This study develops a robustness-aware explainable machine-learning framework for apparent modulus of elasticity (MOEapp), modulus of rupture (MOR), and nominal maximum section shear stress (τmax) of extrusion-printed PrinTimber composite beams. An ABAQUS finite-element framework benchmarked against single- and two-layer beams was extended to 100 configurations spanning 1–10 layers, widths of 42 mm and 84 mm, and span-to-depth ratios (S/D) of 6–30. Because span-to-width ratio is an exact deterministic function of the primary geometry, the analysis uses the independent predictor set [layer count, width, S/D]. Seven surrogates—linear regression, quadratic response-surface modeling, Random Forest, artificial neural network, XGBoost, LightGBM, and Gaussian-process regression—were compared under nested cross-validation with matched tuning budgets. XGBoost gave the highest out-of-fold R2 for all three responses: MOEapp (0.964), MOR (0.702), and τmax (0.836). Across 50 repeated holdouts, it remained most stable for MOEapp (0.941 ± 0.042) and τmax (0.833 ± 0.119), while MOR stayed partition-dependent. Repeated SHAP over 50 partitions identified S/D as dominant for MOEapp (76.4%) and τmax (74.5%) and coupled layer-count/S/D control for MOR. A local ±20% cohesive-parameter perturbation changed predicted ultimate load by, at most, 2%. The framework supports interpretable screening within the modeled design domain while separating numerical-surrogate accuracy from experimental generalization.
Förderung
- National Science Foundation
Zitieren
APA
Hematabadi, H., & Ibrahim, A. A. (2026). Explainable Machine Learning for Multi-Response Structural Performance Prediction of Additively Manufactured PrinTimber Composite Beams. Buildings, 16(22), 4576. https://doi.org/10.3390/buildings16224576
Vancouver
Hematabadi H, Ibrahim AA. Explainable Machine Learning for Multi-Response Structural Performance Prediction of Additively Manufactured PrinTimber Composite Beams. Buildings. 2026;16(22):4576. doi:10.3390/buildings16224576
BibTeX
@article{Hematabadi2026,
author = {Hematabadi, Hojat and Ibrahim, Ahmed A.},
title = {Explainable Machine Learning for Multi-Response Structural Performance Prediction of Additively Manufactured PrinTimber Composite Beams},
journal = {Buildings},
year = {2026},
volume = {16},
number = {22},
pages = {4576},
doi = {10.3390/buildings16224576}
}
EUVIMED