EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Beam–Column Model Considering Local Buckling for Ultimate Capacity Analysis of Flat-Rib-Stiffened Plates in Bridges Under Axial Compression

Guoping Lei, Weijie Peng, Lunhua Bai, Songhua He, Feifan Liu, Lu Wang

Buildings · 15.11.2026 · 16 (22) · 4547

DOI: 10.3390/buildings16224547 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 15.11.2026. Verfasst von Guoping Lei und 5 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangdong Basic and Applied Basic Research Foundation, Open Research Fund of Key Laboratory of Coastal Urban Resilient Infrastructures (Shenzhen University), Ministry of Education.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flat-rib-stiffened plates are widely used in steel bridges, and their ultimate compressive capacity is critical to structural safety. Local buckling under uniform axial compression is the dominant failure mode and is strongly affected by geometric imperfections and residual stresses. Shell finite element (FE) models capture these effects but are computationally demanding for wide box-girder flanges, whereas existing simplified methods have rarely been applied to bridge stiffened plates, and reported beam–column models either treat local buckling only implicitly through an effective width or consider only the global imperfection. To address this gap, this study develops a beam–column model that simultaneously accounts for geometric imperfections, residual stresses, and local plate buckling. Methodologically, the model integrates a plate material database of compressive stress–strain curves with a numerical integration scheme, implemented in an ANSYS–MATLAB program, and three shell FE models with different boundary conditions—orthotropic plate, (½ + ½)-bay, and simply supported—are developed and applied to 32 flat-bar-stiffened plates designed to Chinese specifications. The results show that the orthotropic plate model accurately reproduces multi-span plate behavior, that the two simplified models are accurate for rigidly stiffened plates, and that their applicability for flexibly stiffened plates requires a very small plate aspect ratio. The beam–column model agrees well with the simply supported shell FE model, with a mean ultimate strength ratio of 1.07 and a coefficient of variation of 0.08, providing a computationally efficient alternative for assessing rigidly stiffened flat-bar plates in steel bridges.

Förderung

  • National Natural Science Foundation of China
  • Guangdong Basic and Applied Basic Research Foundation
  • Open Research Fund of Key Laboratory of Coastal Urban Resilient Infrastructures (Shenzhen University), Ministry of Education
  • Science and Technology Innovation Program of Foshan City

Zitieren

APA

Lei, G., Peng, W., Bai, L., He, S., Liu, F., & Wang, L. (2026). Beam–Column Model Considering Local Buckling for Ultimate Capacity Analysis of Flat-Rib-Stiffened Plates in Bridges Under Axial Compression. Buildings, 16(22), 4547. https://doi.org/10.3390/buildings16224547

Vancouver

Lei G, Peng W, Bai L, He S, Liu F, Wang L. Beam–Column Model Considering Local Buckling for Ultimate Capacity Analysis of Flat-Rib-Stiffened Plates in Bridges Under Axial Compression. Buildings. 2026;16(22):4547. doi:10.3390/buildings16224547

BibTeX
@article{Lei2026,
  author = {Lei, Guoping and Peng, Weijie and Bai, Lunhua and He, Songhua and Liu, Feifan and Wang, Lu},
  title = {Beam–Column Model Considering Local Buckling for Ultimate Capacity Analysis of Flat-Rib-Stiffened Plates in Bridges Under Axial Compression},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {22},
  pages = {4547},
  doi = {10.3390/buildings16224547}
}
Kostenlos starten →