EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Predicting Urban Carbon Peak Through an Extended STIRPAT Model: A Scenario Analysis of Bozhou, China

Shu-Guang Zhu, Chang-Qing Wang, Yong-Chang Shen, Zheng Guo, Yun Wan, Ying Qin, Li-Pin Xue, Yu-Qi Feng, Bai Sun

Buildings · 08.11.2026 · 16 (21) · 4458

DOI: 10.3390/buildings16214458 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 08.11.2026. Verfasst von Shu-Guang Zhu und 8 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National key research and development program, Scientific Research Foundation for Anhui Provincial Key Research and Development Project, Natural Science Research Project of the Anhui Educational Committee.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cities play an important role in achieving carbon emission peaking and neutrality targets, yet identifying feasible mitigation pathways remains challenging for prefecture-level cities with limited historical data. This study develops a context-specific extended STIRPAT framework to examine the relationships between urban carbon emissions and nine socioeconomic and sector-related indicators in Bozhou, China. Based on annual data from 2010 to 2022, grey relational analysis was used to support indicator selection, and ridge regression was applied to address severe multicollinearity. Ten scenarios, comprising one baseline and nine alternative development pathways, were constructed to assess carbon emission trajectories during 2023–2035. Population exhibited the largest standardized ridge regression coefficient among the selected explanatory variables. Scenario analysis indicates that carbon emissions under the baseline scenario (S1) reach a projected maximum of 16.78 Mt CO2 in 2030. The energy consumption adjustment scenario (S6) and the coordinated development scenario (S8) reach their projected maxima in 2025, at 15.60 and 15.69 Mt CO2, respectively. Under the integrated scenarios S9 and S10, emissions decline continuously throughout 2023–2035 without reaching a new peak during the projection period. Compared with S1, projected emissions in 2030 are 10.65%, 9.06%, 24.74%, and 37.99% lower under S6, S8, S9, and S10, respectively. A supplementary Monte Carlo analysis further illustrates the sensitivity of these projections to uncertainty in the assumed explanatory-variable growth rates. The findings should be interpreted as conditional scenario outcomes rather than precise forecasts or causal estimates of policy effectiveness.

Förderung

  • the National key research and development program
  • Scientific Research Foundation for Anhui Provincial Key Research and Development Project
  • Natural Science Research Project of the Anhui Educational Committee
  • Top Disciplinary Talents of the Anhui Educational Committee
  • Anhui Province Housing and Urban Rural Construction Science and Technology Project
  • Scientific Research Program of Anhui Provincial Department of Education
  • National Natural Science Foundation of China
  • Scientific Research Start-up Foundation for Introduction of Talent, Anhui Jianzhu University, China

Zitieren

APA

Zhu, S., Wang, C., Shen, Y., Guo, Z., Wan, Y., Qin, Y., Xue, L., Feng, Y., & Sun, B. (2026). Predicting Urban Carbon Peak Through an Extended STIRPAT Model: A Scenario Analysis of Bozhou, China. Buildings, 16(21), 4458. https://doi.org/10.3390/buildings16214458

Vancouver

Zhu S, Wang C, Shen Y, Guo Z, Wan Y, Qin Y, et al. Predicting Urban Carbon Peak Through an Extended STIRPAT Model: A Scenario Analysis of Bozhou, China. Buildings. 2026;16(21):4458. doi:10.3390/buildings16214458

BibTeX
@article{Zhu2026,
  author = {Zhu, Shu-Guang and Wang, Chang-Qing and Shen, Yong-Chang and Guo, Zheng and Wan, Yun and Qin, Ying and Xue, Li-Pin and Feng, Yu-Qi and Sun, Bai},
  title = {Predicting Urban Carbon Peak Through an Extended STIRPAT Model: A Scenario Analysis of Bozhou, China},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {21},
  pages = {4458},
  doi = {10.3390/buildings16214458}
}
Kostenlos starten →