EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties, Microstructure, and Water Absorption of Concrete Reinforced with Surface-Treated Basalt Fibers and Nanosilica

Lucas Katerski, Janete Eunice Zorzi, Giovani Dambros Telli

Buildings · 06.11.2026 · 16 (21) · 4438

DOI: 10.3390/buildings16214438 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 06.11.2026. Verfasst von Lucas Katerski und 2 weiteren Autor:innen. Die Arbeit nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Foundation for the Support of Research in the State of Rio Grande do Sul—Brazil, Coordination for the Improvement of Higher Education Personnel—Brazil.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of fiber- and nanomaterial-modified cementitious composites has attracted increasing attention for their potential to enhance concrete performance and durability, contributing to more efficient and sustainable construction materials. This study investigated the influence of basalt fiber (BF), fiber surface treatment, and nanosilica (NS) on the mechanical properties, workability, microstructure, and capillary water absorption of concrete. Initially, basalt fiber-reinforced concrete (BFRC) mixtures containing fibers with lengths of 3, 6, and 9 mm at contents of 0.1%, 0.3%, and 0.5% by mass of cement were evaluated. Then, the selected 9 mm basalt fibers were surface-treated with HCl, followed by the incorporation of colloidal nanosilica at 1.5% and 3.0% by mass of cement. Compressive and flexural strengths, capillary water absorption, and scanning electron microscopy (SEM) were evaluated. The results showed that higher fiber contents negatively affected workability and mechanical performance, whereas nanosilica improved the performance of concrete containing treated basalt fibers. The highest compressive and flexural strengths among the investigated mixtures were obtained with 0.3% treated 9 mm basalt fibers combined with 3.0% nanosilica. At 63 days, this mixture reached compressive and flexural strengths of 34.87 and 7.57 MPa, representing an increase of 28.2% and 8.3%, respectively, compared with the reference concrete. The incorporation of 3.0% nanosilica also reduced capillary water absorption, particularly at fiber contents of 0.3% and 0.5%. SEM images suggested a denser cementitious matrix and improved fiber–matrix contact. The combined use of treated basalt fibers and nanosilica improved mechanical and microstructural performance while reducing capillary water absorption.

Förderung

  • Foundation for the Support of Research in the State of Rio Grande do Sul—Brazil
  • Coordination for the Improvement of Higher Education Personnel—Brazil

Zitieren

APA

Katerski, L., Zorzi, J. E., & Telli, G. D. (2026). Mechanical Properties, Microstructure, and Water Absorption of Concrete Reinforced with Surface-Treated Basalt Fibers and Nanosilica. Buildings, 16(21), 4438. https://doi.org/10.3390/buildings16214438

Vancouver

Katerski L, Zorzi JE, Telli GD. Mechanical Properties, Microstructure, and Water Absorption of Concrete Reinforced with Surface-Treated Basalt Fibers and Nanosilica. Buildings. 2026;16(21):4438. doi:10.3390/buildings16214438

BibTeX
@article{Katerski2026,
  author = {Katerski, Lucas and Zorzi, Janete Eunice and Telli, Giovani Dambros},
  title = {Mechanical Properties, Microstructure, and Water Absorption of Concrete Reinforced with Surface-Treated Basalt Fibers and Nanosilica},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {21},
  pages = {4438},
  doi = {10.3390/buildings16214438}
}
Kostenlos starten →