EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sampling Moiré Method with Oblique-View Correction for Long-Distance Displacement Monitoring of High-Rise Buildings

Yi-Li Yuan, Yuan Mei, Chang-Ming Hu, Bin-Yu Li

Buildings · 02.11.2026 · 16 (21) · 4388

DOI: 10.3390/buildings16214388 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 02.11.2026. Verfasst von Yi-Li Yuan und 3 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Basic Research Program of Shaanxi.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Vertical displacement monitoring during super high-rise construction requires long stand-off distances and oblique imaging, for which conventional Sampling Moiré Method (SMM) processing suffers projection-scale bias and camera-support drift. This study presents a field-oriented workflow combining intrinsic camera calibration, in-situ marker-plane geometry, SMM phase extraction, and a fixed reference channel. The oblique-view degradation is quantified by a dimensionless period-non-uniformity index that separates uniform projection-scale error from spatial period-gradient error and partitions the tilt/distance space into design zones. Numerical and physical tilt sweeps show that homography rectification and adaptive local sampling keep the RMSE below 0.3 mm up to 60°, where the uncorrected measurement reaches approximately 2 mm; these two strategies are intended for caution/danger-zone geometries, whereas the field workflow used a locally estimated scale correction, consistent with the design case D=58 m (δ=0.59%). A single-run outdoor 50 m three-point experiment shows that differencing against a fixed reference marker reduces the RMSE by 45.7% and approximately 31% at two moving markers. In two non-simultaneous field programmes, the laser rangefinder and corrected SMM were evaluated independently against the same 1–10 mm prescribed sequence. Their ten-level MAE/RMSE values were 0.280/0.303 mm and 0.165/0.207 mm, respectively. Each programme reports accuracy within its own installation and loading arrangement. The results provide short-term evidence for traceable, long-distance oblique-view displacement monitoring during construction.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Basic Research Program of Shaanxi

Zitieren

APA

Yuan, Y., Mei, Y., Hu, C., & Li, B. (2026). Sampling Moiré Method with Oblique-View Correction for Long-Distance Displacement Monitoring of High-Rise Buildings. Buildings, 16(21), 4388. https://doi.org/10.3390/buildings16214388

Vancouver

Yuan Y, Mei Y, Hu C, Li B. Sampling Moiré Method with Oblique-View Correction for Long-Distance Displacement Monitoring of High-Rise Buildings. Buildings. 2026;16(21):4388. doi:10.3390/buildings16214388

BibTeX
@article{Yuan2026,
  author = {Yuan, Yi-Li and Mei, Yuan and Hu, Chang-Ming and Li, Bin-Yu},
  title = {Sampling Moiré Method with Oblique-View Correction for Long-Distance Displacement Monitoring of High-Rise Buildings},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {21},
  pages = {4388},
  doi = {10.3390/buildings16214388}
}
Kostenlos starten →