EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Recent Advances in Integrated Building Cavities: A Comprehensive Review of Fundamentals, Modeling, and Performance Evaluation

Addisu Alamirew Meku, Fitsum Tariku, Phalguni Mukhopadhyaya

Buildings · 02.11.2026 · 16 (21) · 4385

DOI: 10.3390/buildings16214385 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 02.11.2026. Verfasst von Addisu Alamirew Meku und 2 weiteren Autor:innen. Die Arbeit nennt 152 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Victoria, Simon Fraser University, BC Housing Professorship Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Currently, building envelopes are evolving from simple passive shields to smart systems. They control the exchange of energy, air, and moisture within the cavities of buildings. This comprehensive review attempts to investigate the potential performance outcomes resulting from the integration of photovoltaic/thermal systems (PV/Ts), phase change materials (PCMs), and heat pumps (HPs). After the screening process, 153 documents were selected to be synthesized, including 64 primary peer-reviewed publications, 20 standards, and 69 reviews or methodological articles. The results from experimental, field, and numerical studies have shown that cavity integration techniques are effective in achieving photovoltaic cooling, recovering useful heat, reducing heat flux, and supporting heat pump operation. Specifically, annual simulations showed a 6.5% reduction in heating electricity and coefficient of performance (COP) improvements of 22–26%, whereas short-term experiments reported COP gains of 3.3% on average and up to 8.6%. Hybrid (solar/thermal and waste heat recovery) system studies reported that combined heating and cooling energy can be saved by more than 50%. Yet, these results substantially varied with climate, cavity configuration, baseline system, control strategy, averaging period, and auxiliary energy usage. In general, PCM-integrated ventilated cavities can reduce summer heat gains while supporting controlled heat storage and release. However, in extreme weather conditions, application of PCMs may not be effective since complete phase transitions cannot be achieved. Therefore, future studies are recommended to focus on climate-responsive designs, validated hygrothermal models and controls, regulatory compliance, and life-cycle assessments.

Förderung

  • University of Victoria
  • Simon Fraser University
  • BC Housing Professorship Program

Zitieren

APA

Meku, A. A., Tariku, F., & Mukhopadhyaya, P. (2026). Recent Advances in Integrated Building Cavities: A Comprehensive Review of Fundamentals, Modeling, and Performance Evaluation. Buildings, 16(21), 4385. https://doi.org/10.3390/buildings16214385

Vancouver

Meku AA, Tariku F, Mukhopadhyaya P. Recent Advances in Integrated Building Cavities: A Comprehensive Review of Fundamentals, Modeling, and Performance Evaluation. Buildings. 2026;16(21):4385. doi:10.3390/buildings16214385

BibTeX
@article{Meku2026,
  author = {Meku, Addisu Alamirew and Tariku, Fitsum and Mukhopadhyaya, Phalguni},
  title = {Recent Advances in Integrated Building Cavities: A Comprehensive Review of Fundamentals, Modeling, and Performance Evaluation},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {21},
  pages = {4385},
  doi = {10.3390/buildings16214385}
}
Kostenlos starten →