Modelling of FRP-Strengthened Masonry Buildings with Equivalent Frame Models
Buildings · 30.10.2026 · 16 (21) · 4353
DOI: 10.3390/buildings16214353 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 30.10.2026. Verfasst von Ivana Božulić und 2 weiteren Autor:innen. Die Arbeit nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Swiss National Science Foundation.
Abstract (Originalsprache)
Existing masonry buildings can be strengthened to reduce their seismic vulnerability. While the effect of strengthening on the structural elements of a building has been well researched, there are few computationally efficient numerical modelling approaches that capture the effect of strengthening interventions. This paper shows how a recently developed macro-element for unreinforced masonry walls, which can capture both in-plane and out-of-plane failure modes, can model the effect of fibre-reinforced polymer (FRP) strengthening on masonry walls. Practically, FRP strengthening increases the flexural in-plane and out-of-plane strength through longitudinal FRP strips placed against the masonry. In the macro-element, this is modelled through adding fibres to the section model that represent the longitudinal FRP strips. Transversal FRP strips affect the shear strength and in the macro-element this is accounted for by increasing the cohesion in the equation for the shear strength of the macro-element. This paper models quasi-static and dynamic in-plane shear–compression tests as well as out-of-plane bending tests on walls with and without FRP strengthening and compares the numerical simulations to experimental results taken from the literature. The proposed modelling approach for FRP-strengthened masonry walls accurately predicts their in-plane and out-of-plane response, indicating that equivalent frame models can be used to predict the response of masonry buildings with FRP-strengthened walls. The application of the approach is illustrated through hypothetical retrofit configurations of a masonry building that was tested on a shake table in its unstrengthened state.
Förderung
- Swiss National Science Foundation
Zitieren
APA
Božulić, I., Vanin, F., & Beyer, K. (2026). Modelling of FRP-Strengthened Masonry Buildings with Equivalent Frame Models. Buildings, 16(21), 4353. https://doi.org/10.3390/buildings16214353
Vancouver
Božulić I, Vanin F, Beyer K. Modelling of FRP-Strengthened Masonry Buildings with Equivalent Frame Models. Buildings. 2026;16(21):4353. doi:10.3390/buildings16214353
BibTeX
@article{Bouli2026,
author = {Božulić, Ivana and Vanin, Francesco and Beyer, Katrin},
title = {Modelling of FRP-Strengthened Masonry Buildings with Equivalent Frame Models},
journal = {Buildings},
year = {2026},
volume = {16},
number = {21},
pages = {4353},
doi = {10.3390/buildings16214353}
}
EUVIMED