EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simulation Analysis of Factors Affecting the Distribution of Internal Blast Reflection Overpressure on Tunnel Linings with Grey Relational Theory

Zhengpeng Li, Liang Li, Fengzeng Li, Jun Wu, Xiuli Du

Buildings · 15.08.2026 · 16 (16) · 3243

DOI: 10.3390/buildings16163243 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 15.08.2026. Verfasst von Zhengpeng Li und 4 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Investigating the influence level and law of various factors on the distribution of reflected overpressure resulting from explosions in vehicles carrying hazardous chemicals or explosives is of great significance for accounting for the impact of load distribution in the blast-resistant design of structures. This paper uses LS-DYNA software to simulate and investigate the effects of five factors (charge mass (M), charge eccentricity (X), the aspect ratio of cuboid charge (δL/H), charge inclination (θ), and tunnel diameter (D)) on the distribution of reflected overpressure on the lining. The grey relational degree reveals the relative influence of each factor on the reflected overpressure parameters of the lining cross-section (RPPCS) at the blast center. The results show that M, X, and D have the greatest influence on the RPPCS of the blast center. An independent analysis of each factor revealed that the distribution of reflected overpressure from the central charge changes from two-dimensional symmetry to one-dimensional symmetry. Non-central charge disrupts its symmetric distribution. Inclined charge results in an asymmetric distribution. The intensity and incident angle of the shock wave have a significant effect on the location of the maximum reflected overpressure on the lining cross-section (RPCS-max) at the blast center. In the RPCS-max at the blast center, X and θ change their location. θ can alter its distribution shape. When δL/H is too large, increasing M or δL/H will both reduce the reflected overpressure. The influence of various factors on RPPCS is different. Increases in M and D reduce the non-uniform distribution of RPCS, but other factors have the opposite effect. The research findings provide a basis for considering the effects of load distribution in the design of structures resistant to internal explosions.

Zitieren

APA

Li, Z., Li, L., Li, F., Wu, J., & Du, X. (2026). Simulation Analysis of Factors Affecting the Distribution of Internal Blast Reflection Overpressure on Tunnel Linings with Grey Relational Theory. Buildings, 16(16), 3243. https://doi.org/10.3390/buildings16163243

Vancouver

Li Z, Li L, Li F, Wu J, Du X. Simulation Analysis of Factors Affecting the Distribution of Internal Blast Reflection Overpressure on Tunnel Linings with Grey Relational Theory. Buildings. 2026;16(16):3243. doi:10.3390/buildings16163243

BibTeX
@article{Li2026,
  author = {Li, Zhengpeng and Li, Liang and Li, Fengzeng and Wu, Jun and Du, Xiuli},
  title = {Simulation Analysis of Factors Affecting the Distribution of Internal Blast Reflection Overpressure on Tunnel Linings with Grey Relational Theory},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {16},
  pages = {3243},
  doi = {10.3390/buildings16163243}
}
Kostenlos starten →