EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Seismic Behavior of a Novel Modular Connection Joint Between Square Steel Tubular Columns and H-Shaped Steel Beams

Yuan Wang, Zhang-Xi Fan, Jin-Qi Lu, Li-Min Tian

Buildings · 06.08.2026 · 16 (15) · 3135

DOI: 10.3390/buildings16153135 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 06.08.2026. Verfasst von Yuan Wang und 3 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Xi’an University of Architecture and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A critical research gap persists in modular steel construction regarding the seismic behavior of inter-module connections between square steel tubular columns and H-shaped steel beams. While numerous connection systems have been proposed, two fundamental challenges remain unresolved: the inherent conflict between construction efficiency and mechanical performance, and the insufficiency of restoring force models that systematically describe hysteretic characteristics and stiffness degradation under cyclic loading. To address these issues, a novel box-type modular connection between square steel tubular columns and H-shaped steel beams is proposed. A finite element model was established using ABAQUS, and the modeling methodology was validated against experimental results from the literature. The seismic behavior was systematically investigated, and a restoring force model with theoretical saturation and linear degradation was developed. Results show that the novel joint is a semi-rigid connection that satisfies the “strong column–weak beam” design principle. The outer ring plate shifts the plastic hinge away from the vulnerable beam end region, preventing failure at the beam–column connection. Among the detrimental factors identified, the insert-to-column gap has the most severe impact, causing up to a 49.5% reduction in energy dissipation and a 6.5% reduction in initial stiffness; the outer ring plate thickness below the beam flange thickness causes a 44.6% drop in energy dissipation. The proposed restoring force model, validated against nine calibration specimens and one independent specimen, predicts peak load with a deviation of only 1.14% and the equivalent viscous damping coefficient with a relative error of 14.7%, confirming its reliability in capturing the cyclic behavior of the joint. This study provides both design recommendations for engineering practice and a theoretical foundation for elasto-plastic analysis of modular frames with this connection type.

Förderung

  • Xi’an University of Architecture and Technology

Zitieren

APA

Wang, Y., Fan, Z., Lu, J., & Tian, L. (2026). Seismic Behavior of a Novel Modular Connection Joint Between Square Steel Tubular Columns and H-Shaped Steel Beams. Buildings, 16(15), 3135. https://doi.org/10.3390/buildings16153135

Vancouver

Wang Y, Fan Z, Lu J, Tian L. Seismic Behavior of a Novel Modular Connection Joint Between Square Steel Tubular Columns and H-Shaped Steel Beams. Buildings. 2026;16(15):3135. doi:10.3390/buildings16153135

BibTeX
@article{Wang2026,
  author = {Wang, Yuan and Fan, Zhang-Xi and Lu, Jin-Qi and Tian, Li-Min},
  title = {Seismic Behavior of a Novel Modular Connection Joint Between Square Steel Tubular Columns and H-Shaped Steel Beams},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {15},
  pages = {3135},
  doi = {10.3390/buildings16153135}
}
Kostenlos starten →