EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bending- and Non-Destructive Tests of Oak (Quercus spp.) Glued-Laminated Timber

Mátyás Báder, Róbert Németh, Dénes Ákos Horváth, Sándor Fehér

Buildings · 06.08.2026 · 16 (15) · 3116

DOI: 10.3390/buildings16153116 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 06.08.2026. Verfasst von Mátyás Báder und 3 weiteren Autor:innen. Die Arbeit nennt 81 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the mechanical performance and non-destructive evaluation of oak (Quercus spp.) glued-laminated timber (GLT), manufactured from predominantly low-quality lamellae (five layers of 20 mm thick lamellae). The other GLT type tested was a veneer-reinforced configuration (4 mm thick veneers in the first and third layers on both sides of the reinforced GLT, combined with five layers of 15 mm thick low-quality lamellae). 18 basic GLT and 5 reinforced GLT beams, with nominal lengths of 2000 mm were produced using polyurethane adhesive and tested under four-point bending, according to EN 408. Their average densities and standard deviations were 759 ± 23 kg/m3 for basic GLT and 781 ± 6 kg/m3 for reinforced GLT. The reinforced GLT exhibited a substantially higher modulus of rupture (70.9 ± 4.6 MPa) compared to the basic GLT (37.6 ± 6.2 MPa), representing an increase of 89%. The bending modulus of elasticity also increased by 17.2% (12.0 ± 0.6 vs. 10.3 ± 0.6 GPa). The 11.4–12.0 GPa dynamic modulus of elasticity values were consistent with static results. Strain increased by +66.7% from 0.15% to 0.25% with reinforcement. Despite similar densities, adhesive-related failures governed performance in basic GLT. Veneer reinforcement significantly improved their strength, stiffness, and structural reliability.

Zitieren

APA

Báder, M., Németh, R., Horváth, D. Á., & Fehér, S. (2026). Bending- and Non-Destructive Tests of Oak (Quercus spp.) Glued-Laminated Timber. Buildings, 16(15), 3116. https://doi.org/10.3390/buildings16153116

Vancouver

Báder M, Németh R, Horváth DÁ, Fehér S. Bending- and Non-Destructive Tests of Oak (Quercus spp.) Glued-Laminated Timber. Buildings. 2026;16(15):3116. doi:10.3390/buildings16153116

BibTeX
@article{Bder2026,
  author = {Báder, Mátyás and Németh, Róbert and Horváth, Dénes Ákos and Fehér, Sándor},
  title = {Bending- and Non-Destructive Tests of Oak (Quercus spp.) Glued-Laminated Timber},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {15},
  pages = {3116},
  doi = {10.3390/buildings16153116}
}
Kostenlos starten →