Influence of Aggregate Type and SCM Combinations on the Fresh and Mechanical Properties of Ultra-High Performance Concrete
Buildings · 30.07.2026 · 16 (15) · 3035
DOI: 10.3390/buildings16153035 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 30.07.2026. Verfasst von Nermin Redžić und 3 weiteren Autor:innen. Die Arbeit nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union.
Abstract (Originalsprache)
To improve sustainability and reduce the production costs of ultra-high performance concrete (UHPC), the use of locally available aggregates is highly desirable. The combined impact of aggregate type and different supplementary cementitious materials (SCMs) on the fresh and mechanical properties of UHPC is not yet sufficiently understood. Therefore, quartz, limestone, and diabase aggregates together with different SCM combinations were used in the experimental investigation of eighteen UHPC mixtures. Laboratory tests, including flow table, compressive strength, and flexural strength tests, were performed to evaluate the performance of the mixtures. Mixtures containing limestone and fly ash (FA) generally showed higher workability compared to those containing metakaolin (MK). The highest compressive strengths were achieved in mixtures with quartz sand (average 110 MPa) containing approximately 20% MK relative to the total binder content. The mixture with optimal particle distribution and the lowest cement content (500 kg/m3) also showed extremely high mechanical performance. Based on the obtained flexural-to-compressive strength ratios (fb/fc), the expression fc ≈ 7·fb was proposed to estimate the compressive strength of similar fiber-free UHPC mixtures. Furthermore, heat-treated specimens exhibited a 45% higher compressive strength after 7 days compared to the reference mixture, while the addition of polyvinyl alcohol (PVA) fibers caused a slight decrease in compressive strength of approximately 4%. The obtained results contribute to the development of mechanically efficient UHPC mixtures with optimized particle packing and reduced cement consumption, which may improve the sustainability of UHPC production.
Förderung
- European Union
Zitieren
APA
Redžić, N., Grgić, N., Baloević, G., & Filipović, M. (2026). Influence of Aggregate Type and SCM Combinations on the Fresh and Mechanical Properties of Ultra-High Performance Concrete. Buildings, 16(15), 3035. https://doi.org/10.3390/buildings16153035
Vancouver
Redžić N, Grgić N, Baloević G, Filipović M. Influence of Aggregate Type and SCM Combinations on the Fresh and Mechanical Properties of Ultra-High Performance Concrete. Buildings. 2026;16(15):3035. doi:10.3390/buildings16153035
BibTeX
@article{Redi2026,
author = {Redžić, Nermin and Grgić, Nikola and Baloević, Goran and Filipović, Mario},
title = {Influence of Aggregate Type and SCM Combinations on the Fresh and Mechanical Properties of Ultra-High Performance Concrete},
journal = {Buildings},
year = {2026},
volume = {16},
number = {15},
pages = {3035},
doi = {10.3390/buildings16153035}
}
EUVIMED