EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Behavior of Anti-Floating Anchors Under Cyclic Loading Considering Interface Degradation

Minghua Huang, Chenyang Zhang, Chaofan Liu, Pei Shen, Suhua Zhou

Buildings · 30.07.2026 · 16 (15) · 3026

DOI: 10.3390/buildings16153026 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 30.07.2026. Verfasst von Minghua Huang und 4 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Hunan province, Changsha Municipal Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Under cyclic loading, anchorage interfaces in anti-floating anchors may degrade, weakening bond strength and reducing bearing capacity, thereby compromising structural safety. Accordingly, understanding the mechanical behavior of anti-floating anchors while accounting for interface degradation is essential for ensuring the safety of underground structures. This study employs an elastic–plastic shear stress–shear displacement model that incorporates cyclic interface degradation, in which the degradation of interface strength and stiffness is governed by the number of loading cycles and the cyclic degradation parameters. By combining the load transfer method with the finite difference method, a mechanical analysis framework was developed for anti-floating anchors subjected to cyclic loading. The model was validated against published experimental data and then used to investigate interface stress distributions, load transfer mechanisms, and the effects of the number of loading cycles, load amplitude, and mean load. The results show that (1) under initial loading, the stress distribution along the anchoring interface progressively shifts toward the anchor tip as the load increases; (2) under cyclic loading, the bearing capacity of anti-floating anchors decreases continuously with increasing cycle numbers and stabilizes after reaching a certain number of cycles; (3) different initial interface strengths significantly influence the load transfer mechanism. High-strength interfaces can complete load transfer within a shorter anchorage length with more concentrated stress distribution, while low-strength interfaces enter the stable degradation stage earlier with more uniform stress distribution. The cyclic degradation parameter determines the degradation process and ultimate strength state of the interface. These findings provide practical guidance for controlling the long-term uplift deformation of underground structures, thereby helping to reduce the risk of basement upheaval and structural cracking in coastal environments with high groundwater levels.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Hunan province
  • Changsha Municipal Natural Science Foundation of China
  • Science and Technology Plan Project of Guizhou Provincial Department of Transportation

Zitieren

APA

Huang, M., Zhang, C., Liu, C., Shen, P., & Zhou, S. (2026). Mechanical Behavior of Anti-Floating Anchors Under Cyclic Loading Considering Interface Degradation. Buildings, 16(15), 3026. https://doi.org/10.3390/buildings16153026

Vancouver

Huang M, Zhang C, Liu C, Shen P, Zhou S. Mechanical Behavior of Anti-Floating Anchors Under Cyclic Loading Considering Interface Degradation. Buildings. 2026;16(15):3026. doi:10.3390/buildings16153026

BibTeX
@article{Huang2026,
  author = {Huang, Minghua and Zhang, Chenyang and Liu, Chaofan and Shen, Pei and Zhou, Suhua},
  title = {Mechanical Behavior of Anti-Floating Anchors Under Cyclic Loading Considering Interface Degradation},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {15},
  pages = {3026},
  doi = {10.3390/buildings16153026}
}
Kostenlos starten →