EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Calculation of Stability Capacity for Elastically Restrained Sway Reinforced Concrete Slender Columns Based on Elastoplastic Stiffness

Shuwei Lan, Peng Zhou, Difei Zhao, Wei Zhang, Jiansheng Zhang, Hongyu Chen

Buildings · 14.07.2026 · 16 (14) · 2790

DOI: 10.3390/buildings16142790 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 14.07.2026. Verfasst von Shuwei Lan und 5 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Basic Research Project in Yunnan province of China, Special Basic Cooperative Research Programs of Yunnan Provincial Undergraduate Universities’ Association, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the continuous advancement of urban renewal and the renovation and utilization of existing buildings, a large number of existing reinforced concrete slender columns face challenges in capacity evaluation. Quick and accurate calculation of their stability capacity, which represents the upper limit of member capacity, holds significant importance. These columns often exhibit plastic characteristics such as concrete cracking and steel yielding. Moreover, the bracing restraint provided by adjacent columns typically falls between that of a sway frame and a non-sway frame, classifying them as elastically restrained sway frame columns. Current design codes lack appropriate effective length factor tables for such columns, while the stiffness degradation induced by material nonlinearity is difficult to quantify accurately. To address these issues, the frame column is isolated from the overall structure and modeled as a rigid compression member system with three springs. The influence of bracing stiffness on the column’s critical load is revealed, leading to a formula for the elastic critical load of elastically restrained sway frame columns. Based on tests of reinforced concrete columns under compression, the influence mechanisms of eccentricity ratio and longitudinal reinforcement ratio on flexural stiffness degradation are elucidated. The obtained elastoplastic stiffness is then integrated into the stability calculation framework for elastically restrained sway frame columns, resulting in a method for determining the elastoplastic stability capacity of reinforced concrete columns that accounts for both geometric and material nonlinearities. This method avoids solving complex transcendental equations and offers a straightforward calculation process, providing a simple and practical hand-calculation tool for evaluating the stability capacity of reinforced concrete columns in existing buildings.

Förderung

  • Basic Research Project in Yunnan province of China
  • Special Basic Cooperative Research Programs of Yunnan Provincial Undergraduate Universities’ Association
  • National Natural Science Foundation of China

Zitieren

APA

Lan, S., Zhou, P., Zhao, D., Zhang, W., Zhang, J., & Chen, H. (2026). Calculation of Stability Capacity for Elastically Restrained Sway Reinforced Concrete Slender Columns Based on Elastoplastic Stiffness. Buildings, 16(14), 2790. https://doi.org/10.3390/buildings16142790

Vancouver

Lan S, Zhou P, Zhao D, Zhang W, Zhang J, Chen H. Calculation of Stability Capacity for Elastically Restrained Sway Reinforced Concrete Slender Columns Based on Elastoplastic Stiffness. Buildings. 2026;16(14):2790. doi:10.3390/buildings16142790

BibTeX
@article{Lan2026,
  author = {Lan, Shuwei and Zhou, Peng and Zhao, Difei and Zhang, Wei and Zhang, Jiansheng and Chen, Hongyu},
  title = {Calculation of Stability Capacity for Elastically Restrained Sway Reinforced Concrete Slender Columns Based on Elastoplastic Stiffness},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {14},
  pages = {2790},
  doi = {10.3390/buildings16142790}
}
Kostenlos starten →