EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanistic Identification of Modal Softening and Self-Centering in a Full-Scale Mass-Timber Rocking-Wall Building Under Sequential Shake-Table Excitation

Lin Ma, Pengfei Liu, Long Yan, Tenglong Rong

Buildings · 08.07.2026 · 16 (14) · 2706

DOI: 10.3390/buildings16142706 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 08.07.2026. Verfasst von Lin Ma und 3 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mass-timber rocking-wall systems are designed to limit residual deformation by concentrating lateral response in controlled uplift, recentering, and replaceable energy-dissipation mechanisms. Full-scale shake-table records provide a rare opportunity to evaluate this design concept using reproducible physical descriptors rather than isolated peak-response quantities. The public NHERI TallWood two-story mass-timber rocking-wall experiment is reanalyzed using fourteen sequential earthquake records, measured table accelerations, floor and roof accelerations, and instrumented deformation channels. A physics-informed workflow extracts input-intensity, transfer-function, coherence, modal-frequency, equivalent-damping, residual-deformation, self-centering, and deformation-weighted inertial-demand descriptors. An experiment-updated equivalent elastic Abaqus model converts selected identified states into three-dimensional displacement and stress-transfer fields. The identified dominant frequency decreases from approximately 2.11 Hz in the initial low-level event to approximately 0.70 Hz after the final maximum-level excitation, corresponding to a frequency-squared stiffness-loss index near 0.89. Despite this pronounced modal softening, measured residual deformation remains small in absolute terms, and the self-centering index remains moderate to high over most of the sequence. The results indicate that the tested system evolves mainly through changes in contact, uplift, diaphragm compatibility, and interface stiffness rather than through a conventional cumulative plastic-damage mechanism. The descriptor set and calibrated finite-element visualization provide a transferable basis for comparing future mass-timber shake-table datasets and for linking open experimental repositories, modal identification, and finite-element state visualization in performance-based seismic assessment of low-damage timber buildings.

Zitieren

APA

Ma, L., Liu, P., Yan, L., & Rong, T. (2026). Mechanistic Identification of Modal Softening and Self-Centering in a Full-Scale Mass-Timber Rocking-Wall Building Under Sequential Shake-Table Excitation. Buildings, 16(14), 2706. https://doi.org/10.3390/buildings16142706

Vancouver

Ma L, Liu P, Yan L, Rong T. Mechanistic Identification of Modal Softening and Self-Centering in a Full-Scale Mass-Timber Rocking-Wall Building Under Sequential Shake-Table Excitation. Buildings. 2026;16(14):2706. doi:10.3390/buildings16142706

BibTeX
@article{Ma2026,
  author = {Ma, Lin and Liu, Pengfei and Yan, Long and Rong, Tenglong},
  title = {Mechanistic Identification of Modal Softening and Self-Centering in a Full-Scale Mass-Timber Rocking-Wall Building Under Sequential Shake-Table Excitation},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {14},
  pages = {2706},
  doi = {10.3390/buildings16142706}
}
Kostenlos starten →