EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Low Carbon During the Construction Design Process Based on BIM and Life Cycle Assessment

Basaula Pululu Jordan, Xinyu Yang, Yingjie Shi, Shanzhi Wang, Xuan Cao, Daren Zhang, Yujing Yang, Hao Peng

Buildings · 03.07.2026 · 16 (13) · 2653

DOI: 10.3390/buildings16132653 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 03.07.2026. Verfasst von Basaula Pululu Jordan und 7 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Scholarship Council, Fundamental Research Program of Shanxi Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reducing embodied greenhouse gas emissions in the initial design phase is essential for attaining low-carbon buildings, as the highest potential for reduction exists prior to the finalization of construction decisions. While Building Information Modelling (BIM) and Life Cycle Assessment (LCA) have been progressively integrated for embodied carbon evaluation, current frameworks are predominantly deterministic, offer minimal uncertainty quantification, and seldom utilize machine-learning-assisted optimization to facilitate design decision-making. This paper presents an uncertainty-aware BIM–LCA methodology to solve these shortcomings, integrating automated quantity takeoff, probabilistic carbon assessment, and explainable machine-learning optimization. The proposed methodology integrates IFC-based BIM models, Bills of Quantities (BoQs), and regional life cycle inventory databases to conduct a cradle-to-grave embodied carbon assessment. Quantities produced from BIM were checked against BoQ data, and the uncertainty related to material quantities and emission factors was assessed by Monte Carlo simulation. A machine-learning surrogate model was created with 1200 design samples to facilitate swift optimization, and SHapley Additive exPlanations (SHAPs) were utilized to determine the most significant design factors. A mid-rise residential structure in Chongqing, China, encompassing a gross floor area of 9750.03 m2, was used as a case study. The baseline Global Warming Potential (GWP) was calculated as 514.29 ± 30.09 kgCO2e/m2 (A1–A5), with product-stage emissions (A1–A3) accounting for roughly 89.28% of total embodied carbon, predominantly from concrete and steel. Enhanced BIM maturity lowered uncertainty by roughly 20%. Optimization resulted in a 38.13% decrease in embodied carbon, reducing GWP to 318.21 kgCO2e/m2. SHAP research identified the percentage of material reuse and concrete composition as the primary factors influencing carbon reduction. The suggested framework offers a clear and replicable decision-support mechanism for low-carbon building design that accounts for uncertainty.

Förderung

  • China Scholarship Council
  • Fundamental Research Program of Shanxi Province

Zitieren

APA

Jordan, B. P., Yang, X., Shi, Y., Wang, S., Cao, X., Zhang, D., Yang, Y., & Peng, H. (2026). Research on Low Carbon During the Construction Design Process Based on BIM and Life Cycle Assessment. Buildings, 16(13), 2653. https://doi.org/10.3390/buildings16132653

Vancouver

Jordan BP, Yang X, Shi Y, Wang S, Cao X, Zhang D, et al. Research on Low Carbon During the Construction Design Process Based on BIM and Life Cycle Assessment. Buildings. 2026;16(13):2653. doi:10.3390/buildings16132653

BibTeX
@article{Jordan2026,
  author = {Jordan, Basaula Pululu and Yang, Xinyu and Shi, Yingjie and Wang, Shanzhi and Cao, Xuan and Zhang, Daren and Yang, Yujing and Peng, Hao},
  title = {Research on Low Carbon During the Construction Design Process Based on BIM and Life Cycle Assessment},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {13},
  pages = {2653},
  doi = {10.3390/buildings16132653}
}
Kostenlos starten →