EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Compressive Performance of Fabricated Reinforced Concrete Columns Strengthened with CFRP Sheets: Experimental and Finite Element Analysis

Jian Wu, Changhao Wei, Shi’en Zhang, Yuanyuan Lv, Hongyang Yu, Weigao Ding

Buildings · 27.06.2026 · 16 (13) · 2564

DOI: 10.3390/buildings16132564 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 27.06.2026. Verfasst von Jian Wu und 5 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shaanxi Provincial Department of Education Government-Enterprise Joint Funding Project, Scientific Research Foundation for High-level Talents.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fabricated reinforced concrete columns are important components of reinforced concrete structures. During the design reference period, columns are prone to degradation in mechanical and deformation properties, which affects the normal service of the structure. Based on compressive tests of fabricated reinforced concrete columns, this paper uses ABAQUS 2021 finite element analysis software to explore how factors such as column damage and CFRP sheet layout affect the compressive performance of fabricated concrete columns under eccentric compression in order to investigate their mechanical properties and the confinement effect of CFRP sheets on such columns. The results indicate that the change trend of the bearing capacity of the finite element model is largely in agreement with that of the test specimens, and the ultimate bearing capacity error is below 3%, thereby confirming the validity of the finite element model. Compared with strip confinement, full-wrap confinement achieves a greater improvement in ultimate bearing capacity, and two to three layers are recommended as the ideal number of CFRP sheets for strengthening. The maximum increase in ultimate bearing capacity can reach 19.18%. When the strip width is constant, the smaller the spacing, the smaller the concrete strain in the compression zone. When the net spacing is constant, reducing the strip width increases the number of cracks and decreases crack width, but reduces the ultimate bearing capacity of the column accordingly. Strengthening with CFRP sheets can enhance the ultimate bearing capacity, deformability, and ductility of columns with initial damage under both small and large eccentric compression. The maximum increase in ultimate bearing capacity can reach 8.31%. The results obtained in this paper are conducive to promoting the reinforcement and reconstruction of fabricated reinforced concrete columns and reinforced concrete structures.

Förderung

  • Shaanxi Provincial Department of Education Government-Enterprise Joint Funding Project
  • Scientific Research Foundation for High-level Talents

Zitieren

APA

Wu, J., Wei, C., Zhang, S., Lv, Y., Yu, H., & Ding, W. (2026). Study on the Compressive Performance of Fabricated Reinforced Concrete Columns Strengthened with CFRP Sheets: Experimental and Finite Element Analysis. Buildings, 16(13), 2564. https://doi.org/10.3390/buildings16132564

Vancouver

Wu J, Wei C, Zhang S, Lv Y, Yu H, Ding W. Study on the Compressive Performance of Fabricated Reinforced Concrete Columns Strengthened with CFRP Sheets: Experimental and Finite Element Analysis. Buildings. 2026;16(13):2564. doi:10.3390/buildings16132564

BibTeX
@article{Wu2026,
  author = {Wu, Jian and Wei, Changhao and Zhang, Shi’en and Lv, Yuanyuan and Yu, Hongyang and Ding, Weigao},
  title = {Study on the Compressive Performance of Fabricated Reinforced Concrete Columns Strengthened with CFRP Sheets: Experimental and Finite Element Analysis},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {13},
  pages = {2564},
  doi = {10.3390/buildings16132564}
}
Kostenlos starten →