Parametric Optimization Analysis on Flexural Performance of Steel–UHTCC Composite Bridge Decks
Buildings · 21.06.2026 · 16 (12) · 2453
DOI: 10.3390/buildings16122453 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 21.06.2026. Verfasst von Ming-Lei Ma und 6 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CSCEC Technology R&D Program, CCEED Technology R&D Program.
Abstract (Originalsprache)
To investigate the influence of different structural design parameters on the flexural performance of steel–UHTCC composite bridge decks and to determine reasonable ranges for these parameters, a finite element model was developed based on a literature review and existing experimental studies. The numerical results were then validated against experimental data, confirming the reliability of the model. Subsequently, a parametric study was conducted using the validated model, systematically considering the effects of rib thickness, rib height, steel deck thickness, UHTCC layer thickness, and longitudinal reinforcement ratio on the flexural behavior of the composite bridge decks, and recommendations for appropriate parameter values were proposed. The results indicate that increasing rib thickness and rib height is relatively cost-effective for improving the flexural performance of steel–UHTCC composite bridge decks, whereas increasing steel deck thickness and UHTCC layer thickness is less efficient in enhancing flexural performance. In addition, the amount of longitudinal reinforcement has a negligible effect on both the load-bearing capacity and stiffness of the composite bridge decks.
Förderung
- CSCEC Technology R&D Program
- CCEED Technology R&D Program
Zitieren
APA
Ma, M., Chai, J., Yu, C., Xu, G., Wu, B., Tong, J., & Li, Q. (2026). Parametric Optimization Analysis on Flexural Performance of Steel–UHTCC Composite Bridge Decks. Buildings, 16(12), 2453. https://doi.org/10.3390/buildings16122453
Vancouver
Ma M, Chai J, Yu C, Xu G, Wu B, Tong J, et al. Parametric Optimization Analysis on Flexural Performance of Steel–UHTCC Composite Bridge Decks. Buildings. 2026;16(12):2453. doi:10.3390/buildings16122453
BibTeX
@article{Ma2026,
author = {Ma, Ming-Lei and Chai, Ji-Long and Yu, Cheng-Da and Xu, Guo-Wen and Wu, Biao and Tong, Jing-Zhong and Li, Qing-Hua},
title = {Parametric Optimization Analysis on Flexural Performance of Steel–UHTCC Composite Bridge Decks},
journal = {Buildings},
year = {2026},
volume = {16},
number = {12},
pages = {2453},
doi = {10.3390/buildings16122453}
}
EUVIMED