Numerical Investigation of Parameters Influencing the Shear Capacity of Reinforced Concrete Beams
Buildings · 12.06.2026 · 16 (12) · 2356
DOI: 10.3390/buildings16122356 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 12.06.2026. Verfasst von Fazil Abdulkadir Caglar und 4 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigates the shear damage mechanisms in reinforced concrete (RC) beams through non-linear numerical modeling. Using the Finite Element Method (FEM) in ABAQUS, a Concrete Damaged Plasticity (CDP) framework was validated against experimental results and subsequently utilized for a 36-model parametric investigation. The study isolated the influence of stirrup spacing, diameter, and yield strength to evaluate their roles in ultimate shear capacity. The results indicated that while increasing stirrup diameter yielded modest capacity enhancements of approximately 7%, the impact of increasing yield strength was negligible, as the failure modes were primarily governed by concrete web crushing before reinforcement yielding could occur. These physical limit states were compared against the linear Truss Analogy adopted by major design standards—including ACI 318-19, Eurocode 2, and TS 500—to quantify discrepancies in heavily reinforced sections. The findings reveal that, strictly within the investigated parameter space (a/d = 2.67, f’c = 28.5 MPa), current linear equations can significantly overestimate the physical capacity gains provided by reinforcement modifications. These observations are configuration-specific and highlight the need for cautious application of linear models in heavily reinforced scenarios. Furthermore, the study suggests that utilizing 3D beam elements for transverse reinforcement provides a more nuanced representation of shear transfer mechanisms, such as dowel action, compared to standard truss models.
Zitieren
APA
Caglar, F. A., Tatar, T., Bicici, E., Saribiyik, A., & Demir, A. (2026). Numerical Investigation of Parameters Influencing the Shear Capacity of Reinforced Concrete Beams. Buildings, 16(12), 2356. https://doi.org/10.3390/buildings16122356
Vancouver
Caglar FA, Tatar T, Bicici E, Saribiyik A, Demir A. Numerical Investigation of Parameters Influencing the Shear Capacity of Reinforced Concrete Beams. Buildings. 2026;16(12):2356. doi:10.3390/buildings16122356
BibTeX
@article{Caglar2026,
author = {Caglar, Fazil Abdulkadir and Tatar, Tuba and Bicici, Erkan and Saribiyik, Ali and Demir, Aydin},
title = {Numerical Investigation of Parameters Influencing the Shear Capacity of Reinforced Concrete Beams},
journal = {Buildings},
year = {2026},
volume = {16},
number = {12},
pages = {2356},
doi = {10.3390/buildings16122356}
}
EUVIMED