Efficient Numerical Modelling Technology of Timber Post-and-Beam Frame Robustness
Buildings · 09.06.2026 · 16 (12) · 2309
DOI: 10.3390/buildings16122309 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 09.06.2026. Verfasst von Janis Sliseris und 4 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Latvian national research program, EU ERDF-funded.
Abstract (Originalsprache)
The structural strength requirements for timber buildings have been significantly tightened in the second generation of Eurocodes (EN 1990:2023, EN 1991-1-7), which poses a particular challenge for solid timber frames with a beam-and-column structure, where the transfer of tensile forces via dowel connections is inherently limited. Existing multiscale frameworks for timber post-and-beam robustness lack operational detail at each scale, and no validated workflow currently bridges joint-level continuum damage mechanics and frame-level progressive failure analysis in compliance with the second-generation Eurocodes. This paper addresses this gap by proposing an effective two-scale finite element method (FEM) modelling framework for assessing the strength of such frames during column removal. Existing multiscale models describing the strength of timber structures with beam-and-column systems lack the operational details necessary to integrate failure mechanics at the joint level and progressive failure modelling at the frame level within a single, validated workflow. In this paper, this gap is addressed through three specific contributions: a physically modified quadratic Hashin-type failure criterion for timber, which eliminates the non-physical increase in shear strength under combined stress states perpendicular to the grain; a two-scale structure based on the finite element method (FEM), in which the results of continuous damage mechanics at the joint level directly parameterise non-linear joint elements with six degrees of freedom at the frame level, taking into account coupled directional wear and erosion of the elements; and quantitative validation of both scales against experimental data and the conversion factors for characteristic values of the second generation of Eurocode 5 (prEN 1995-1-1:2023). At the connection level, the simulated strength and stiffness values agree with the experiments to within an error of no more than 5%. At the frame level, the model correctly reproduces the non-linear ‘load–displacement’ relationship, the sequence of joint failure, and the axial forces in the chain line for vertical displacements up to 390 mm, which corresponds to experimental observations.
Förderung
- Latvian national research program
- EU ERDF-funded
Zitieren
APA
Sliseris, J., Berzins, A., Serdjuks, D., Briuka, E., & Lapkovskis, V. (2026). Efficient Numerical Modelling Technology of Timber Post-and-Beam Frame Robustness. Buildings, 16(12), 2309. https://doi.org/10.3390/buildings16122309
Vancouver
Sliseris J, Berzins A, Serdjuks D, Briuka E, Lapkovskis V. Efficient Numerical Modelling Technology of Timber Post-and-Beam Frame Robustness. Buildings. 2026;16(12):2309. doi:10.3390/buildings16122309
BibTeX
@article{Sliseris2026,
author = {Sliseris, Janis and Berzins, Andris and Serdjuks, Dmitrijs and Briuka, Elza and Lapkovskis, Vjaceslavs},
title = {Efficient Numerical Modelling Technology of Timber Post-and-Beam Frame Robustness},
journal = {Buildings},
year = {2026},
volume = {16},
number = {12},
pages = {2309},
doi = {10.3390/buildings16122309}
}
EUVIMED