High-Precision 3D Reconstruction of Historic Buildings Using Multi-Source Data
Buildings · 27.05.2026 · 16 (11) · 2146
DOI: 10.3390/buildings16112146 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 27.05.2026. Verfasst von Yu Guo und 1 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering Research Center for Spatial Atlas Information Protection of Ethnic Minority Murals and Rock Paintings, West Yunnan University of Applied Sciences, Research on 3D Street View Model Construction Based on Vehicle-Mounted Multi-View and Multi-Sensor Data Fusion.
Abstract (Originalsprache)
Historic building documentation requires both complete spatial coverage and reliable geometric detail, but a single surveying technique often cannot meet both requirements in complex heritage scenes. This study proposes a robustness-oriented TLS–UAV point cloud registration and fusion workflow for historic building documentation. The workflow combines feature-based coarse registration with an improved point-to-plane ICP strategy incorporating normal consistency, radiometric correspondence filtering, dynamic distance thresholds, and multi-resolution refinement. The method was evaluated using the Yao’an Lu Junmin Zongguan Fu, a timber–brick courtyard complex in Yunnan, China, under small, medium, and large initial perturbations. Under small and medium perturbations, Point-to-Plane ICP achieved lower RMSE values, while the proposed method produced comparable results. Under large perturbation, the proposed method achieved the highest success rate and the lowest RMSE of 119.0 cm, indicating stronger robustness under challenging initialization. The fused TLS–UAV model achieved checkpoint-based RMSE values of 1.73 cm horizontally and 0.75 cm vertically. Spatial deviation maps showed that residual errors were mainly concentrated around roof edges, eaves, wall corners, and roof–facade transition zones. Cross-scene validation on the Church of Agios Mamas dataset achieved a registration RMSE of 1.2 cm without parameter adjustment. The results show that the proposed workflow is suitable for offline conservation-oriented documentation where registration robustness, model completeness, and component-level geometric interpretation are required.
Förderung
- Engineering Research Center for Spatial Atlas Information Protection of Ethnic Minority Murals and Rock Paintings, West Yunnan University of Applied Sciences
- Research on 3D Street View Model Construction Based on Vehicle-Mounted Multi-View and Multi-Sensor Data Fusion
Zitieren
APA
Guo, Y., & Yang, Y. (2026). High-Precision 3D Reconstruction of Historic Buildings Using Multi-Source Data. Buildings, 16(11), 2146. https://doi.org/10.3390/buildings16112146
Vancouver
Guo Y, Yang Y. High-Precision 3D Reconstruction of Historic Buildings Using Multi-Source Data. Buildings. 2026;16(11):2146. doi:10.3390/buildings16112146
BibTeX
@article{Guo2026,
author = {Guo, Yu and Yang, Yongming},
title = {High-Precision 3D Reconstruction of Historic Buildings Using Multi-Source Data},
journal = {Buildings},
year = {2026},
volume = {16},
number = {11},
pages = {2146},
doi = {10.3390/buildings16112146}
}
EUVIMED