EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fragility Analysis of RC Frames Accounting for In-Plan Irregularity Using Artificially Introduced Incremental Eccentricity

Abdelghaffar Messaoudi, Mahmoud Abd-Elwahab, Hossameldeen Mohamed, Rachid Chebili, Hany Madkour, Mohamed Zakaria, Hugo Rodrigues

Buildings · 23.05.2026 · 16 (11) · 2086

DOI: 10.3390/buildings16112086 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 23.05.2026. Verfasst von Abdelghaffar Messaoudi und 6 weiteren Autor:innen. Die Arbeit nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Foundation for Science and Technology, Fundação para a Ciência e a Tecnologia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Reinforced concrete (RC) buildings are the most common structural system in urbanising regions. In many cases, architectural constraints and uneven distribution of structural elements often create eccentricity between the centre of mass (CM) and the centre of rigidity (CR). This eccentricity may induce torsional effects during earthquakes that can significantly influence structural response and increase seismic vulnerability. This study investigates the impact of in-plan irregularity on the seismic performance of RC buildings using nonlinear numerical analyses. Three-dimensional models of four- and six-storey RC buildings with moment resisting frames were developed in OpenSees, where different levels of irregularity were introduced by artificially shifting the lumped mass to generate controlled eccentricities without modifying the structural configuration. Seismic performance was evaluated using nonlinear incremental dynamic analysis (IDA) based on forty ground motion records under bidirectional excitation. The results indicate that increasing CM–CR eccentricity amplifies inter-storey drift demands and elevates the probability of damage due to intensified torsional stresses. The adverse effect is most pronounced when eccentricity aligns with the direction of lower stiffness, whereas eccentricity in the stiffer direction has a limited impact on severe damage states, particularly for taller buildings. These findings provide valuable insights for risk-informed assessment, retrofitting, and prioritisation of existing plan-irregular RC buildings.

Förderung

  • Foundation for Science and Technology
  • Fundação para a Ciência e a Tecnologia

Zitieren

APA

Messaoudi, A., Abd-Elwahab, M., Mohamed, H., Chebili, R., Madkour, H., Zakaria, M., & Rodrigues, H. (2026). Fragility Analysis of RC Frames Accounting for In-Plan Irregularity Using Artificially Introduced Incremental Eccentricity. Buildings, 16(11), 2086. https://doi.org/10.3390/buildings16112086

Vancouver

Messaoudi A, Abd-Elwahab M, Mohamed H, Chebili R, Madkour H, Zakaria M, et al. Fragility Analysis of RC Frames Accounting for In-Plan Irregularity Using Artificially Introduced Incremental Eccentricity. Buildings. 2026;16(11):2086. doi:10.3390/buildings16112086

BibTeX
@article{Messaoudi2026,
  author = {Messaoudi, Abdelghaffar and Abd-Elwahab, Mahmoud and Mohamed, Hossameldeen and Chebili, Rachid and Madkour, Hany and Zakaria, Mohamed and Rodrigues, Hugo},
  title = {Fragility Analysis of RC Frames Accounting for In-Plan Irregularity Using Artificially Introduced Incremental Eccentricity},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {11},
  pages = {2086},
  doi = {10.3390/buildings16112086}
}
Kostenlos starten →