EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of Hydraulic Jig Efficiency in Separation and Concentration of Ceramic Particles from Construction and Demolition Waste (CDW)

Hassan Barkat, Artur Bressanelli Teixeira, Asfandyaar Saifullah Khan, Carlos Hoffmann Sampaio, Josep Oliva Moncunill, Weslei Monteiro Ambrós, Fortunato Lucas Quembo Raposo, Bruna de Oliveira Gomes

Buildings · 06.05.2026 · 16 (9) · 1847

DOI: 10.3390/buildings16091847 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 06.05.2026. Verfasst von Hassan Barkat und 7 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia de Gestió d’Ajuts Universitaris i de Recerca, European Union.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Construction and demolition waste (CDW) poses a significant environmental challenge, and the efficient recovery of high-quality recycled aggregates (RA) is vital for sustainable resource use. This study assesses how water jigging functions as a gravimetric separation method for ceramics, bricks, gypsum, and concrete, emulating the composition of inert CDW components. Material parameters, including bulk density, specific gravity, and shape factor, were initially measured to evaluate their effect on separation performance. Laboratory jig tests employed various controlled feed combinations, and the material stratification was analyzed at different levels of the jigging bed. The results exhibited that separation performance is dependent strongly on mixture complexity and density contrast. In binary mixtures, the B3 mixture showed the sharpest separation, reaching ceramic recovery to 92.65% in dense layer and separation efficiency of 90.59%. The materials with similar properties, particularly ceramics and bricks, showed greater overlap in layers and weaker stratification. In ternary systems the ceramics recovered mainly in intermediate layer with recovery range 46.8–49.6% and the maximum separation efficiency was 19.21%. Results indicating that addition of third component reduces the separation sharpness due to differences in particle morphology and overlapping density ranges. This investigation shows that water jigging has potential for ceramic-rich fractions upgrading in CDW, especially if differences between density of components are significant.

Förderung

  • Agencia de Gestió d’Ajuts Universitaris i de Recerca
  • European Union

Zitieren

APA

Barkat, H., Teixeira, A. B., Khan, A. S., Sampaio, C. H., Moncunill, J. O., Ambrós, W. M., Raposo, F. L. Q., & Gomes, B. D. O. (2026). Analysis of Hydraulic Jig Efficiency in Separation and Concentration of Ceramic Particles from Construction and Demolition Waste (CDW). Buildings, 16(9), 1847. https://doi.org/10.3390/buildings16091847

Vancouver

Barkat H, Teixeira AB, Khan AS, Sampaio CH, Moncunill JO, Ambrós WM, et al. Analysis of Hydraulic Jig Efficiency in Separation and Concentration of Ceramic Particles from Construction and Demolition Waste (CDW). Buildings. 2026;16(9):1847. doi:10.3390/buildings16091847

BibTeX
@article{Barkat2026,
  author = {Barkat, Hassan and Teixeira, Artur Bressanelli and Khan, Asfandyaar Saifullah and Sampaio, Carlos Hoffmann and Moncunill, Josep Oliva and Ambrós, Weslei Monteiro and Raposo, Fortunato Lucas Quembo and Gomes, Bruna de Oliveira},
  title = {Analysis of Hydraulic Jig Efficiency in Separation and Concentration of Ceramic Particles from Construction and Demolition Waste (CDW)},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {9},
  pages = {1847},
  doi = {10.3390/buildings16091847}
}
Kostenlos starten →