Preparation and Characterization of HIR Multi-Layer Abrasion-Resistant Coating for Hydraulic Concrete
Buildings · 01.05.2026 · 16 (9) · 1799
DOI: 10.3390/buildings16091799 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 01.05.2026. Verfasst von Yu Chen und 5 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technical Consulting and Service Project of Mid-Route Source of South-to-North Water Transfer Co., Ltd., Basic Research Funds for Central Level Public Welfare Research Institutes.
Abstract (Originalsprache)
Hydraulic concrete suffers severe damage from high-velocity sand-bearing water flow. Traditional single-layer coating materials struggle to simultaneously satisfy the requirements of strong adhesion, high abrasion resistance, and long-term durability. In this study, a functionally graded multilayer composite coating system, designated HIR (Hybrid Epoxy–Interfacial Primer–Rubber), was developed. The HIR system comprises a hybrid acrylic–epoxy resin (HEP) top layer, a modified epoxy-based interfacial primer (EIP), and a sprayed liquid rubber (SLR) middle layer, realizing synergistic enhancement of interfacial bonding, deformation adaptability, and abrasion resistance. The results showed that the HIR achieved an adhesion strength exceeding 2.0 MPa to concrete. The HEP exhibited an elongation at break exceeding 30%, while the SLR showed an elongation at break higher than 1000%. The anti-abrasion strength of the HIR-coated concrete reached 254.35 h/(kg/m2), which is 15 times that of uncoated concrete. Moreover, the coated concrete maintained a relative dynamic elastic modulus above 95% after 300 freeze–thaw cycles. DMA revealed multiple glass transition temperatures in both SLR (24 °C, 101 °C, 137 °C) and HEP (62 °C), enabling effective energy dissipation over a wide temperature range. Through interlayer property matching and synergistic enhancement, the HIR significantly enhances both abrasion resistance and freeze–thaw durability of hydraulic concrete.
Förderung
- Technical Consulting and Service Project of Mid-Route Source of South-to-North Water Transfer Co., Ltd.
- Basic Research Funds for Central Level Public Welfare Research Institutes
Zitieren
APA
Chen, Y., Li, Q., Cui, D., Zhang, J., Han, W., & Chang, X. (2026). Preparation and Characterization of HIR Multi-Layer Abrasion-Resistant Coating for Hydraulic Concrete. Buildings, 16(9), 1799. https://doi.org/10.3390/buildings16091799
Vancouver
Chen Y, Li Q, Cui D, Zhang J, Han W, Chang X. Preparation and Characterization of HIR Multi-Layer Abrasion-Resistant Coating for Hydraulic Concrete. Buildings. 2026;16(9):1799. doi:10.3390/buildings16091799
BibTeX
@article{Chen2026,
author = {Chen, Yu and Li, Quanhong and Cui, Dongdong and Zhang, Jihong and Han, Wei and Chang, Xizheng},
title = {Preparation and Characterization of HIR Multi-Layer Abrasion-Resistant Coating for Hydraulic Concrete},
journal = {Buildings},
year = {2026},
volume = {16},
number = {9},
pages = {1799},
doi = {10.3390/buildings16091799}
}
EUVIMED