Clay-Based Composite Materials: A Review of Structural Advantages, Sustainability and Applications
Buildings · 26.04.2026 · 16 (9) · 1711
DOI: 10.3390/buildings16091711 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 26.04.2026. Verfasst von Moundher Mouaki Benani und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 86 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Clay-based composite materials offer a low-carbon pathway for improving the environmental performance of the construction sector while maintaining relevance for architectural and heritage applications. A structured qualitative literature review was conducted, supported by thematic classification and exploratory bibliometric mapping (VOSviewer), based on peer-reviewed studies published between 2015 and 2025 relevant to the topic of clay minerals, stabilization, fibers, polymers, alkali activation, properties, performance, and applicability in architecture. According to the results obtained from the synthesized literature, it is seen that clay-based composites achieve performance improvement through complementary mechanisms: fiber reinforcement improves ductility, crack behavior, and energy absorption, polymer modification helps improve cohesion and water resistance and alkali activation transforms calcined aluminosilicate precursors into high-strength binding systems. The synthesis identifies three dominant performance mechanisms governing clay-based composites. Selected alkali-activated clay composite materials are reported to exhibit compression strengths higher than 60 MPa, and certain optimized systems may be able to provide lower thermal conductivity and lower levels of carbon emission in comparison with ordinary cement-based materials. The contribution of this paper lies in the synthesis of these material modification techniques and resulting performance aspects for their applicability in architecture, clarifying the potential of clay-based composites for sustainable construction, heritage compatible interventions, and future material development. By integrating material science with architectural applications, this study identifies the potential of clay-based composites for sustainable and heritage-compatible approaches to contribute to sustainable and circular construction practices, while also outlining key challenges and future research directions focused on optimization, large-scale implementation, and heritage-compatible innovation.
Zitieren
APA
Benani, M. M., & Onescu, I. (2026). Clay-Based Composite Materials: A Review of Structural Advantages, Sustainability and Applications. Buildings, 16(9), 1711. https://doi.org/10.3390/buildings16091711
Vancouver
Benani MM, Onescu I. Clay-Based Composite Materials: A Review of Structural Advantages, Sustainability and Applications. Buildings. 2026;16(9):1711. doi:10.3390/buildings16091711
BibTeX
@article{Benani2026,
author = {Benani, Moundher Mouaki and Onescu, Iasmina},
title = {Clay-Based Composite Materials: A Review of Structural Advantages, Sustainability and Applications},
journal = {Buildings},
year = {2026},
volume = {16},
number = {9},
pages = {1711},
doi = {10.3390/buildings16091711}
}
EUVIMED