EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Mechanical Properties and Microscopic Mechanisms of Alkali-Activated Coal Gangue Cementitious Materials

Xuejing Zhang, Mingyuan Zhou, Yuan Mei, Hongping Lu

Buildings · 12.04.2026 · 16 (8) · 1507

DOI: 10.3390/buildings16081507 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 12.04.2026. Verfasst von Xuejing Zhang und 3 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Alkali-activated cementitious materials (AACMs) are recognized as promising green building materials and a viable alternative to traditional cement due to their low carbon footprint, high durability, and superior mechanical properties. These materials primarily utilize industrial by-products such as coal gangue, steel slag, and gasification slag. The alkali activation process offers an environmentally friendly pathway for the construction industry. To address the need for the large-scale utilization of bulk solid wastes, this study established a ternary solid waste synergy system comprising coal gangue, steel slag, and gasification slag. The preparation and performance optimization of AACMs based on this system were investigated. An optimal mix proportion was identified through orthogonal experiments, and the influence of various factors on the mechanical properties at different curing ages was analyzed. The results indicate that the fluidity of all AACMs meets the requirements for general backfilling applications. Among the alkali activators, Na2SO4 had the smallest effect on fluidity. Under single-activator conditions, sodium silicate (water glass) and sodium hydroxide exerted a greater influence on strength development compared to anhydrous sodium sulfate. For the composite activator system, the significance of parameters affecting compressive strength followed the order: silicate modulus > alkali activator content. The maximum 28-day unconfined compressive strength reached 7.653 MPa with a mix proportion of 55% coal gangue, 45% steel slag, and 5% gasification slag, as well as a silicate modulus of 1.2 and a water glass content of 8%. This represents increases of 540.95% and 299.25% compared to the non-activated group and single-activator groups, respectively. Microstructural analysis revealed that the enhanced integrity and strength of AACMs are attributed to pore-filling by hydration products, predominantly C–S–H and C–A–S–H gels. This study successfully developed high-performance AACMs based on a coal gangue–steel slag–gasification slag ternary system, elucidating the critical regulatory role of silicate modulus in composite activators and the underlying microstructural strengthening mechanisms. The findings provide a theoretical foundation and technical support for the high-value, large-scale utilization of bulk industrial solid wastes in building materials.

Zitieren

APA

Zhang, X., Zhou, M., Mei, Y., & Lu, H. (2026). Study on Mechanical Properties and Microscopic Mechanisms of Alkali-Activated Coal Gangue Cementitious Materials. Buildings, 16(8), 1507. https://doi.org/10.3390/buildings16081507

Vancouver

Zhang X, Zhou M, Mei Y, Lu H. Study on Mechanical Properties and Microscopic Mechanisms of Alkali-Activated Coal Gangue Cementitious Materials. Buildings. 2026;16(8):1507. doi:10.3390/buildings16081507

BibTeX
@article{Zhang2026,
  author = {Zhang, Xuejing and Zhou, Mingyuan and Mei, Yuan and Lu, Hongping},
  title = {Study on Mechanical Properties and Microscopic Mechanisms of Alkali-Activated Coal Gangue Cementitious Materials},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {8},
  pages = {1507},
  doi = {10.3390/buildings16081507}
}
Kostenlos starten →