Development of a Design Decision-Support Process for Photovoltaic System for Zero-Energy Building Certification and Operation
Buildings · 03.04.2026 · 16 (7) · 1426
DOI: 10.3390/buildings16071426 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 03.04.2026. Verfasst von Sanghoon Park und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Incheon National University.
Abstract (Originalsprache)
As zero-energy buildings (ZEBs) become increasingly mandatory, photovoltaic (PV) systems play a key role in increasing on-site energy generation. For staged ZEB certification based on the energy self-sufficiency ratio (ESSR), it is essential to determine the required power generation and to design PV systems with appropriate installation area and location. This study proposes a systematic design decision-support process for PV system planning that links required energy generation to panel installation strategies. The process enables the determination of a feasible installation area and location of PV panels and was implemented as a design-support program. The proposed process was applied to an apartment building under construction with a ZEB certification grade 5. Compared to the existing design, the optimal design reduced the required PV system capacity by 1.7% while increasing the predicted power generation by approximately 2.8%. The reported improvement in energy generation represents a relative comparison between design alternatives evaluated under identical modeling assumptions and therefore remains valid for comparative design decision-making. Field measurements conducted at a residential building with installed PV systems showed that the predicted power generation is consistent with measured trends, supporting comparative design evaluation and feasibility screening in early-stage PV planning. The developed design process provides a practical framework for early-stage PV system planning, supporting informed design decisions to meet target energy self-sufficiency requirements in ZEBs.
Förderung
- Incheon National University
Zitieren
APA
Park, S., & Kim, D. (2026). Development of a Design Decision-Support Process for Photovoltaic System for Zero-Energy Building Certification and Operation. Buildings, 16(7), 1426. https://doi.org/10.3390/buildings16071426
Vancouver
Park S, Kim D. Development of a Design Decision-Support Process for Photovoltaic System for Zero-Energy Building Certification and Operation. Buildings. 2026;16(7):1426. doi:10.3390/buildings16071426
BibTeX
@article{Park2026,
author = {Park, Sanghoon and Kim, Dongwoo},
title = {Development of a Design Decision-Support Process for Photovoltaic System for Zero-Energy Building Certification and Operation},
journal = {Buildings},
year = {2026},
volume = {16},
number = {7},
pages = {1426},
doi = {10.3390/buildings16071426}
}
EUVIMED