Mix Proportion Design and Performance Regulation of 3D-Printing Phosphogypsum-Based Geopolymer Paste
Buildings · 01.04.2026 · 16 (7) · 1387
DOI: 10.3390/buildings16071387 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 01.04.2026. Verfasst von Pengjia Zhu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Project of Henan Province, Key scientific research project of Henan University.
Abstract (Originalsprache)
Building 3D printing technology exhibits remarkable construction advantages, with solid waste-based 3D printing slurry emerging as a research hotspot in the field. Phosphogypsum is compatible with diverse solid wastes for the fabrication of geopolymer, whereas its feasibility as a 3D printing material merits further investigation. In this study, calcium carbide slag (CS), ground granulated blast-furnace slag (GGBS), recycled concrete powder (RCP), and phosphogypsum (PG) underwent co-activation. The mix proportion received optimization via response surface methodology (RSM), and printability assessment proceeded based on the optimized proportion. Key conclusions include the following: PG exerts a role in optimizing the internal structure within the geopolymer matrix. The 28-day compressive strength of the composite geopolymer exceeds 25 MPa. Application as a 3D printing material facilitates enhancement of slurry stability in the later stage. Excessive PG addition elevates the shear stress and viscosity of the 3D printing paste, shortens the paste open time, and impedes paste extrusion and molding. Based on a comprehensive analysis of printability and the performance of printed specimens, the optimal mix proportion of the phosphogypsum-based geopolymer 3D printing paste was determined as follows: CS: 22.5%; GGBS: 45%; RCP: 22.5%; PG: 10%; W/b: 0.4.
Förderung
- National Natural Science Foundation of China
- Science and Technology Project of Henan Province
- Key scientific research project of Henan University
- Colleges Young Teacher Training Project of Henan Province
Zitieren
APA
Zhu, P., Tan, H., Ma, J., Yin, J., Zhang, B., & Tong, Y. (2026). Mix Proportion Design and Performance Regulation of 3D-Printing Phosphogypsum-Based Geopolymer Paste. Buildings, 16(7), 1387. https://doi.org/10.3390/buildings16071387
Vancouver
Zhu P, Tan H, Ma J, Yin J, Zhang B, Tong Y. Mix Proportion Design and Performance Regulation of 3D-Printing Phosphogypsum-Based Geopolymer Paste. Buildings. 2026;16(7):1387. doi:10.3390/buildings16071387
BibTeX
@article{Zhu2026,
author = {Zhu, Pengjia and Tan, Hailong and Ma, Juntao and Yin, Jianguang and Zhang, Binbin and Tong, Yuping},
title = {Mix Proportion Design and Performance Regulation of 3D-Printing Phosphogypsum-Based Geopolymer Paste},
journal = {Buildings},
year = {2026},
volume = {16},
number = {7},
pages = {1387},
doi = {10.3390/buildings16071387}
}
EUVIMED