Performance of Round-Ended Concrete-Filled Steel Tubular Columns Under Combined Compression–Bending–Shear Loading
Buildings · 28.03.2026 · 16 (7) · 1348
DOI: 10.3390/buildings16071348 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 28.03.2026. Verfasst von Yan Peng und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study develops and validates a finite element model for round-ended concrete-filled steel tubular (CFST) columns subjected to combined compression–bending–shear loading using ABAQUS. Based on the calibrated model, the mechanical behavior of such members is thoroughly analyzed, including lateral bearing capacity, axial force evolution, and interaction mechanisms. The influences of key parameters, such as shear-span ratio, axial load ratio, cross-sectional aspect ratio, concrete strength, and steel yield strength, on the bearing capacity are systematically investigated. Furthermore, a calculation method for predicting the ultimate bearing capacity is proposed based on the section equivalent approach. The results demonstrate that the loading direction relative to the principal axes significantly affects structural performance: long-axis loading leads to higher bearing capacity and improved ductility, whereas short-axis loading reduces the ultimate capacity by an average of 49%. As the shear-span ratio increases, the ultimate lateral capacity gradually decreases. For shear-span ratios between 1.0 and 3.0, the long-axis loaded specimens exhibit pronounced compression–bending–shear failure modes. Variations in the axial load ratio notably influence both lateral capacity and axial force distribution; both bearing capacity and ductility decrease with increasing axial load ratio, although the effect on ultimate capacity remains minor when the axial load ratio does not exceed 0.4.
Zitieren
APA
Peng, Y., Liu, J., He, J., He, Z., & Deng, F. (2026). Performance of Round-Ended Concrete-Filled Steel Tubular Columns Under Combined Compression–Bending–Shear Loading. Buildings, 16(7), 1348. https://doi.org/10.3390/buildings16071348
Vancouver
Peng Y, Liu J, He J, He Z, Deng F. Performance of Round-Ended Concrete-Filled Steel Tubular Columns Under Combined Compression–Bending–Shear Loading. Buildings. 2026;16(7):1348. doi:10.3390/buildings16071348
BibTeX
@article{Peng2026,
author = {Peng, Yan and Liu, Junfeng and He, Junping and He, Zongfeng and Deng, Fan},
title = {Performance of Round-Ended Concrete-Filled Steel Tubular Columns Under Combined Compression–Bending–Shear Loading},
journal = {Buildings},
year = {2026},
volume = {16},
number = {7},
pages = {1348},
doi = {10.3390/buildings16071348}
}
EUVIMED