A Review of the Rheological Properties of 3D-Printed Concrete: Raw Materials, Printing Parameters, and Evolution Mechanisms
Buildings · 23.03.2026 · 16 (6) · 1264
DOI: 10.3390/buildings16061264 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 23.03.2026. Verfasst von Jianfen Luo und 3 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 219 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 2026 Zhejiang Provincial Philosophy and Social Sciences Planning Annual Regular Project.
Abstract (Originalsprache)
As a representative digital additive construction material, three-dimensional printed concrete (3DPC) imposes a synergistic rheological requirement on fresh cementitious mixtures, namely “pumpability–extrudability–buildability,” throughout the forming process. Rheological parameters and their temporal evolution not only govern the stability of the material during pumping, nozzle extrusion, and layer-by-layer deposition, but also directly determine interlayer interfacial integrity, geometric fidelity, and the development of macroscopic mechanical performance. This paper provides a systematic review of the regulation strategies and evolutionary characteristics of 3DPC rheology, with particular emphasis on how raw material composition, printing parameters, and multiscale evolution mechanisms influence yield stress, plastic viscosity, and thixotropic behavior. The time-dependent evolution of rheological properties is elucidated across multiple length scales, encompassing microscopic particle interactions and hydration-induced bridging, mesoscopic aggregate force-chain networks and particle migration, and macroscopic shear stimulation coupled with temperature–humidity effects. On this basis, it is further highlighted that existing models and characterization frameworks remain insufficient to capture the time-dependent structural evolution under realistic printing conditions. Therefore, the establishment of unified characterization standards, together with in situ rheological measurements and multiscale simulations, is urgently required to enable the coordinated optimization of material design and printing processes and to facilitate engineering-scale implementation.
Förderung
- 2026 Zhejiang Provincial Philosophy and Social Sciences Planning Annual Regular Project
Zitieren
APA
Luo, J., Wang, Q., Wang, L., & Fang, M. (2026). A Review of the Rheological Properties of 3D-Printed Concrete: Raw Materials, Printing Parameters, and Evolution Mechanisms. Buildings, 16(6), 1264. https://doi.org/10.3390/buildings16061264
Vancouver
Luo J, Wang Q, Wang L, Fang M. A Review of the Rheological Properties of 3D-Printed Concrete: Raw Materials, Printing Parameters, and Evolution Mechanisms. Buildings. 2026;16(6):1264. doi:10.3390/buildings16061264
BibTeX
@article{Luo2026,
author = {Luo, Jianfen and Wang, Qidong and Wang, Lijia and Fang, Mingyue},
title = {A Review of the Rheological Properties of 3D-Printed Concrete: Raw Materials, Printing Parameters, and Evolution Mechanisms},
journal = {Buildings},
year = {2026},
volume = {16},
number = {6},
pages = {1264},
doi = {10.3390/buildings16061264}
}
EUVIMED