Seismic Performance of Shaped Steel Tubes
Buildings · 19.03.2026 · 16 (6) · 1228
DOI: 10.3390/buildings16061228 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 19.03.2026. Verfasst von Chengcheng Bao und 5 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Undergraduate Training Programs for Innovations by NEFU.
Abstract (Originalsprache)
Conventional buckling-restrained braces (BRBs) with rectangular steel tube confinement suffer from stress concentration and inefficient material utilization, limiting their seismic performance. To address these limitations, this study proposes a novel non-rectangular concrete-filled steel tube BRB system incorporating elliptical and corrugated cross-sections. Comprehensive finite element simulations using ABAQUS are conducted to systematically investigate the influence of key geometric parameters—wall thickness (1–14 mm), corner radius (40–55 mm), and corrugation angle (30–75°)—on hysteretic behavior, load-bearing capacity, and failure modes. The results demonstrate that optimized non-rectangular sections achieve load-bearing capacity comparable to conventional rectangular designs (e.g., elliptical section with 12 mm wall thickness reaches 10.02 MN, a 75% increase over 1 mm thickness) while significantly improving material efficiency. Corrugated sections exhibit enhanced weak-axis performance, with equivalent viscous damping ratios exceeding the NIST-recommended threshold of 0.25. Parametric analyses reveal that wall thickness above 12 mm yields diminishing returns; corner radius reduction to 40 mm triggers local buckling yet increases peak capacity; and corrugation angles exceeding 50° induce instability. All non-buckling models satisfy AISC compression strength adjustment factor requirements (β ≤ 1.3). This study systematically evaluates non-rectangular BRB geometries, filling a critical gap in the literature and providing design guidelines that leverage shape optimization to enhance both seismic resilience and material economy.
Förderung
- Undergraduate Training Programs for Innovations by NEFU
Zitieren
APA
Bao, C., Piao, Y., Ji, C., Liu, Y., Li, L., & Lu, J. (2026). Seismic Performance of Shaped Steel Tubes. Buildings, 16(6), 1228. https://doi.org/10.3390/buildings16061228
Vancouver
Bao C, Piao Y, Ji C, Liu Y, Li L, Lu J. Seismic Performance of Shaped Steel Tubes. Buildings. 2026;16(6):1228. doi:10.3390/buildings16061228
BibTeX
@article{Bao2026,
author = {Bao, Chengcheng and Piao, Yueqiao and Ji, Chengyou and Liu, Yilin and Li, Liangzhuo and Lu, Junkai},
title = {Seismic Performance of Shaped Steel Tubes},
journal = {Buildings},
year = {2026},
volume = {16},
number = {6},
pages = {1228},
doi = {10.3390/buildings16061228}
}
EUVIMED