EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact Resistance of Hybrid Steel Fiber-Reinforced Concrete Beam Under Accelerated Non-Uniform Corrosion

Siyao Li, Zhiji Gao, Yezhe Shao, Dashan Li, Yunong Wang, Xuefeng Zhang, Gonghui Gu

Buildings · 18.03.2026 · 16 (6) · 1197

DOI: 10.3390/buildings16061197 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 18.03.2026. Verfasst von Siyao Li und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Continuation Funding Project of the Outstanding Youth Foundation of Zhejiang Provincial Natural Science Foundation, National Natural Science Foundations of China, China Postdoctoral Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, an accelerated non-uniform corrosion method controlled by time and current was employed to fabricate power-on accelerated corrosion specimens of hybrid steel fiber-reinforced concrete (HSFRC) gradient beams. Experimental research was conducted to investigate their impact resistance, revealing the dynamic response patterns of these gradient beams with varying steel fiber contents. By analyzing the evolutionary characteristics of impact load, displacement, energy dissipation, equivalent impact bearing capacity, and dynamic amplification factor, the influence of steel fibers with different sizes and contents on the bearing capacity degradation and mechanical properties of HSFRC gradient beams under the same corrosion conditions was clarified. The synergistic enhancement mechanism of multi-scale steel fibers in the beams was elucidated, highlighting the complementary effects of long fibers and short fibers at different stages of material damage. Results show that the incorporation of steel fibers can effectively improve the impact resistance of reinforced concrete gradient beams, with a maximum improvement of approximately 2.5 times. Compared with gradient beams reinforced with single long fibers, the peak impact force of HSFRC gradient beams increases by about 16%, and different steel fiber ratio plays a significant role in regulating impact resistance. Within the corrosion range of 3% to 5%, the equivalent impact bearing capacity of gradient beams is negatively correlated with the reinforcement corrosion rate.

Förderung

  • Continuation Funding Project of the Outstanding Youth Foundation of Zhejiang Provincial Natural Science Foundation
  • National Natural Science Foundations of China
  • China Postdoctoral Science Foundation
  • Engineering Research Center of the Ministry of Education for Renewable Energy Infrastructure Construction Technology

Zitieren

APA

Li, S., Gao, Z., Shao, Y., Li, D., Wang, Y., Zhang, X., & Gu, G. (2026). Impact Resistance of Hybrid Steel Fiber-Reinforced Concrete Beam Under Accelerated Non-Uniform Corrosion. Buildings, 16(6), 1197. https://doi.org/10.3390/buildings16061197

Vancouver

Li S, Gao Z, Shao Y, Li D, Wang Y, Zhang X, et al. Impact Resistance of Hybrid Steel Fiber-Reinforced Concrete Beam Under Accelerated Non-Uniform Corrosion. Buildings. 2026;16(6):1197. doi:10.3390/buildings16061197

BibTeX
@article{Li2026,
  author = {Li, Siyao and Gao, Zhiji and Shao, Yezhe and Li, Dashan and Wang, Yunong and Zhang, Xuefeng and Gu, Gonghui},
  title = {Impact Resistance of Hybrid Steel Fiber-Reinforced Concrete Beam Under Accelerated Non-Uniform Corrosion},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {6},
  pages = {1197},
  doi = {10.3390/buildings16061197}
}
Kostenlos starten →