Interface Force Transfer Mechanism of Internal Prestressing and Section Enlargement Composite Reinforcement in PC Box Girder Bridges
Buildings · 16.03.2026 · 16 (6) · 1159
DOI: 10.3390/buildings16061159 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 16.03.2026. Verfasst von Qu Wang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Fujian Province.
Abstract (Originalsprache)
To address issues such as web and bottom plate cracking and insufficient bending capacity in in-service prestressed concrete box girder bridges, this study proposes internal prestressing and section enlargement composite reinforcement. Firstly, taking a bridge of Shenhai Expressway as the background project, the combined reinforcement method is designed and the reinforcement effect is analyzed by MIDAS/Civil. Secondly, through numerical analysis, the influence of the bond shrinkage of self-compacting concrete with different mix ratios on the stress of the web of the original box girder is analyzed, and the interface between the new and old concrete is carried out. The analysis of the loss of the new prestress on the bonding surface of the new and old concrete is carried out by parameters such as the interface planting rate, the interface shear stiffness and the reinforcement structure. Furthermore, the theoretical calculation method of prestress loss rate of new and old concrete bonding interface is obtained. The results show that the flexural capacity of the normal section of the main beam is significantly improved after reinforcement, and the surplus coefficient is 1.18, which meets the requirements of the secondary safety level, and the mid-span deflection is improved by 34.28%, which verifies the effectiveness and feasibility of the combined reinforcement method. When the content of fly ash is 54%, the bond shrinkage strain and shrinkage stress of self-compacting concrete are reduced to the lowest level, which has the least influence on the existing box girder structure. It is suggested that the reinforcement ratio between the new and old concrete interface is 0.6%, and the interface roughness is 0.9 mm, which can increase the shear resistance of the new and old concrete interface and effectively reduce the transfer loss of prestress at the interface. Error analysis shows that the proposed semi-empirical calculation method has high accuracy with a deviation of less than 10%.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Fujian Province
Zitieren
APA
Wang, Q., Han, X., Fang, Z., Wu, Q., Huang, Q., Chen, K., & Xie, Y. (2026). Interface Force Transfer Mechanism of Internal Prestressing and Section Enlargement Composite Reinforcement in PC Box Girder Bridges. Buildings, 16(6), 1159. https://doi.org/10.3390/buildings16061159
Vancouver
Wang Q, Han X, Fang Z, Wu Q, Huang Q, Chen K, et al. Interface Force Transfer Mechanism of Internal Prestressing and Section Enlargement Composite Reinforcement in PC Box Girder Bridges. Buildings. 2026;16(6):1159. doi:10.3390/buildings16061159
BibTeX
@article{Wang2026,
author = {Wang, Qu and Han, Xiangyu and Fang, Ziming and Wu, Qingxiong and Huang, Qingwei and Chen, Kangming and Xie, Yi},
title = {Interface Force Transfer Mechanism of Internal Prestressing and Section Enlargement Composite Reinforcement in PC Box Girder Bridges},
journal = {Buildings},
year = {2026},
volume = {16},
number = {6},
pages = {1159},
doi = {10.3390/buildings16061159}
}
EUVIMED