EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influences of Inclination Angles and Loading Scenarios on the Elasto-Plastic Stability of a Steel Basket-Handle Arch Structure

Zijing Zhang, Zhanfei Wang, Qiang Zhang, Jia Chen

Buildings · 04.03.2026 · 16 (5) · 1013

DOI: 10.3390/buildings16051013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 04.03.2026. Verfasst von Zijing Zhang und 3 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Tackling Project of the Department of Education of Liaoning Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effects of an arch rib inclination angle and loading scenario on the elasto-plastic stability of steel basket-handle arches to support bridge design. A parametric finite element analysis was performed on 48 models, with inclination angles ranging from 0° to 15° under three vertical loading conditions: uniformly distributed (V), transversely eccentric (V1), and longitudinally eccentric (V2). A nonlinear analysis was conducted using the arc-length method. The results indicate that the ultimate bearing capacity is highest under loading V, followed by V1 and V2, irrespective of the inclination angle. The initial stiffness increases monotonically with inclination in all cases. Under V, the capacity peaks at a 10° inclination before declining, with a corresponding transition from out-of-plane to in-plane buckling at this critical angle. Under V1, out-of-plane buckling dominates, and the capacity fluctuates slightly before increasing with the inclination. Under V2, in-plane antisymmetric buckling prevails, and the capacity decreases gradually as the inclination increases. Eccentric loading induces severe stress concentration and local buckling at the arch feet, accelerating global failure. It is concluded that an inclination angle up to 10° enhances elasto-plastic stability under symmetric vertical loading, whereas eccentric loading substantially reduces the capacity; therefore, symmetric and simultaneous loading on both arches is recommended during construction.

Förderung

  • Key Tackling Project of the Department of Education of Liaoning Province

Zitieren

APA

Zhang, Z., Wang, Z., Zhang, Q., & Chen, J. (2026). Influences of Inclination Angles and Loading Scenarios on the Elasto-Plastic Stability of a Steel Basket-Handle Arch Structure. Buildings, 16(5), 1013. https://doi.org/10.3390/buildings16051013

Vancouver

Zhang Z, Wang Z, Zhang Q, Chen J. Influences of Inclination Angles and Loading Scenarios on the Elasto-Plastic Stability of a Steel Basket-Handle Arch Structure. Buildings. 2026;16(5):1013. doi:10.3390/buildings16051013

BibTeX
@article{Zhang2026,
  author = {Zhang, Zijing and Wang, Zhanfei and Zhang, Qiang and Chen, Jia},
  title = {Influences of Inclination Angles and Loading Scenarios on the Elasto-Plastic Stability of a Steel Basket-Handle Arch Structure},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {5},
  pages = {1013},
  doi = {10.3390/buildings16051013}
}
Kostenlos starten →