EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Assessing the Impact of Building Surface Materials on Local Thermal Environment Using Infrared Thermal Imagery and Microclimate Simulations

Ryan Jonathan, Tao Lin, Isaac Lun, Samuel D. Widijatmoko, Yu-Ting Tang

Buildings · 13.01.2026 · 16 (2) · 334

DOI: 10.3390/buildings16020334 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 13.01.2026. Verfasst von Ryan Jonathan und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Strategic Priority Research Program of the Chinese Academy of Sciences, Major Special Project—the China High-Resolution Earth Observation System, International Partnership Program of Chinese Academy of Sciences.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The built environment is responsible for 40% of global energy demand, and, in line with urbanisation and population growth, this demand is expected to increase steadily. Urban areas are mostly composed of materials that can absorb energy from solar radiation and dissipate the accumulated energy in the form of heat. This study integrates a UAV-based Zenmuse XT S IR camera and handheld FLIR C5 thermal camera with ENVI-met microclimate simulation, providing quantitative insights for sustainable urban planning. From the 24 h experiment results, the characteristics of building surface materials are profiled for lowering energy use for internal thermal control during the operation stage of buildings. This study shows that building surface materials with the lowest solar reflectance and highest specific heat capacity reached a peak surface temperature of 73.5 °C in Jakarta (tropical hot climate) and 44.3 °C in Xiamen (subtropical late winter climate). In contrast, materials with the highest solar reflectance and lowest specific heat only reach a peak surface temperature of 58.1 °C in Jakarta and 27.9 °C in Xiamen. The peak surface temperature occurs at 2 PM in the afternoon. Moreover, we demonstrate the capability of an infrared drone to identify the peak surface temperatures of 55.8 °C at 2 PM in the study area in Xiamen. In addition, the ENVI-met validated model shows satisfactory correlation values of R > 0.9 and R2 > 0.8. This result demonstrates UAV-IR and ENVI-met simulation integration as a scalable method for city-level UHI diagnostics and monitoring.

Förderung

  • Strategic Priority Research Program of the Chinese Academy of Sciences
  • Major Special Project—the China High-Resolution Earth Observation System
  • International Partnership Program of Chinese Academy of Sciences
  • National Natural Science Foundation of China
  • Xiamen Key Laboratory of smart management on the urban environment
  • University of Nottingham Ningbo China
  • Research England Development Fund

Zitieren

APA

Jonathan, R., Lin, T., Lun, I., Widijatmoko, S. D., & Tang, Y. (2026). Assessing the Impact of Building Surface Materials on Local Thermal Environment Using Infrared Thermal Imagery and Microclimate Simulations. Buildings, 16(2), 334. https://doi.org/10.3390/buildings16020334

Vancouver

Jonathan R, Lin T, Lun I, Widijatmoko SD, Tang Y. Assessing the Impact of Building Surface Materials on Local Thermal Environment Using Infrared Thermal Imagery and Microclimate Simulations. Buildings. 2026;16(2):334. doi:10.3390/buildings16020334

BibTeX
@article{Jonathan2026,
  author = {Jonathan, Ryan and Lin, Tao and Lun, Isaac and Widijatmoko, Samuel D. and Tang, Yu-Ting},
  title = {Assessing the Impact of Building Surface Materials on Local Thermal Environment Using Infrared Thermal Imagery and Microclimate Simulations},
  journal = {Buildings},
  year = {2026},
  volume = {16},
  number = {2},
  pages = {334},
  doi = {10.3390/buildings16020334}
}
Kostenlos starten →