EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Random Corrosion on the Surface of Rock Bolts on the Propagation Characteristics of Ultrasonic Guided Waves: Taking Corrosion Depth and Area Ratio as Variables

Manman Wang, Qianjin Zou, Haigang Li, Wen He

Buildings · 06.11.2025 · 15 (21) · 4009

DOI: 10.3390/buildings15214009 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 06.11.2025. Verfasst von Manman Wang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China under the 14th Five-Year Plan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Corrosion of rock bolts in engineering exhibits random spatial distribution characteristics. To elucidate the influence mechanism of stochastic corrosion on the surface of rock bolts on the propagation behavior of ultrasonic guided waves, this study establishes a finite element model of rock bolts that incorporates stochastic corrosion characteristics. The coupled effects of corrosion depth and area ratio on guided wave propagation characteristics, time-domain response, energy distribution, and wave velocity variation are systematically investigated. Results indicate that corrosion depth and area ratio synergistically deteriorate guided wave morphology, transforming the stress field from symmetric and uniform to asymmetric and spiral. Reflections, scattering, and mode conversion induced by defects lead to a significant increase in the attenuation rate of pulse amplitude, with the two parameters governing the vertical interaction intensity and horizontal interference scope, respectively. Analysis of the Hilbert curve reveals that corrosion characteristics disrupt energy concentration. Under constant corrosion depth, an increase in area ratio disperses energy toward delayed scattered waves, while under constant area ratio, greater corrosion depth reduces the peak amplitude of the envelope curve. Overall, the energy integral exhibits an increasing trend with the degree of corrosion, whereas the peak-to-peak wave velocity shows a declining trend. The established multivariate nonlinear model accurately describes the coupled influence of corrosion parameters on wave velocity. This stochastic corrosion model overcomes the limitations of traditional simplified models and provides critical theoretical support for parameter calibration and engineering application of ultrasonic guided wave technology in the quantitative assessment of rock bolt corrosion.

Förderung

  • National Key Research and Development Program of China under the 14th Five-Year Plan

Zitieren

APA

Wang, M., Zou, Q., Li, H., & He, W. (2025). Influence of Random Corrosion on the Surface of Rock Bolts on the Propagation Characteristics of Ultrasonic Guided Waves: Taking Corrosion Depth and Area Ratio as Variables. Buildings, 15(21), 4009. https://doi.org/10.3390/buildings15214009

Vancouver

Wang M, Zou Q, Li H, He W. Influence of Random Corrosion on the Surface of Rock Bolts on the Propagation Characteristics of Ultrasonic Guided Waves: Taking Corrosion Depth and Area Ratio as Variables. Buildings. 2025;15(21):4009. doi:10.3390/buildings15214009

BibTeX
@article{Wang2025,
  author = {Wang, Manman and Zou, Qianjin and Li, Haigang and He, Wen},
  title = {Influence of Random Corrosion on the Surface of Rock Bolts on the Propagation Characteristics of Ultrasonic Guided Waves: Taking Corrosion Depth and Area Ratio as Variables},
  journal = {Buildings},
  year = {2025},
  volume = {15},
  number = {21},
  pages = {4009},
  doi = {10.3390/buildings15214009}
}
Kostenlos starten →