EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of Waste Steel Fiber Usage Rate and Length Change on Some Fresh State Properties of 3D Printable Concrete Mixtures

Fatih Eren Akgümüş, Hatice Gizem Şahin, Ali Mardani

Buildings · 16.10.2025 · 15 (20) · 3731

DOI: 10.3390/buildings15203731 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 16.10.2025. Verfasst von Fatih Eren Akgümüş und 2 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the effects of waste steel fiber and high volume blast furnace slag (BFS) substitution on rheological properties, thixotropic behavior and carbon emission were investigated in order to increase the sustainability of three-dimensional (3D) printable concrete (3DPC). Cement was replaced with BFS at 0%, 25%, 50% and 75% by volume, while waste steel fibers were added to the mixtures at three different lengths (5, 10, 15 mm) and volumetric ratios (0.5% and 1.0%). A total of 39 mixtures were optimized with respect to extrudability, buildability and shape stability criteria, and their rheological and thixotropic properties were characterized by a modified rheometer procedure. Results showed that 50% BFS substitution reduced dynamic yield stress and viscosity by 69% and 52%, respectively, and eliminated the need for a water-reducing admixture. 75% BFS substitution improved structural build-up (Athix) but required 6% silica fume. The fiber effect interacted with length and BFS content, with short fibers increasing rheological resistance, while the effect of long fibers decreased in mixtures with high BFS. The carbon emission assessment revealed that 75% BFS substitution provided an outstanding CO2 reduction of up to 71% compared to the control mix. These findings prove that high-volume BFS and waste fibers are an effective strategy to optimize rheological performance and environmental impact for sustainable 3D concrete printing.

Zitieren

APA

Akgümüş, F. E., Şahin, H. G., & Mardani, A. (2025). Investigation of Waste Steel Fiber Usage Rate and Length Change on Some Fresh State Properties of 3D Printable Concrete Mixtures. Buildings, 15(20), 3731. https://doi.org/10.3390/buildings15203731

Vancouver

Akgümüş FE, Şahin HG, Mardani A. Investigation of Waste Steel Fiber Usage Rate and Length Change on Some Fresh State Properties of 3D Printable Concrete Mixtures. Buildings. 2025;15(20):3731. doi:10.3390/buildings15203731

BibTeX
@article{Akgm2025,
  author = {Akgümüş, Fatih Eren and Şahin, Hatice Gizem and Mardani, Ali},
  title = {Investigation of Waste Steel Fiber Usage Rate and Length Change on Some Fresh State Properties of 3D Printable Concrete Mixtures},
  journal = {Buildings},
  year = {2025},
  volume = {15},
  number = {20},
  pages = {3731},
  doi = {10.3390/buildings15203731}
}
Kostenlos starten →