Optimisation and Mechanical Behaviour Analysis of Splice Joints in Prefabricated H-Shaped Steel Beams
Buildings · 08.10.2025 · 15 (19) · 3610
DOI: 10.3390/buildings15193610 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 08.10.2025. Verfasst von Xin Zhang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shandong Provincial Natural Science Foundation.
Abstract (Originalsprache)
This study investigated the mechanical behaviour of splice joints in prefabricated H-shaped steel beams assembled using high-strength bolts under four-point bending. Four distinct splice joint configurations were tested through mechanical experiments on prefabricated H-shaped steel beams to examine their failure modes, flexural strength, and stress distribution in the sections. Numerical simulations were performed using ANSYS finite element software to validate the experimental results. Findings reveal that specimens with double splice joints exhibit a significant reduction in both flexural bearing capacity and stiffness compared to those with single splice joints. Moreover, the distance between splice joints is a critical factor affecting the bearing capacity of the specimen. The splice joints in both the H-shaped steel and connecting plates are classified as semi-rigid connections. Additionally, the stress distribution at the splice joints deviates from the plane section assumption. A formula for calculating the deflection of spliced specimens in the elastic stage under pure bending was developed and validated with experimental data.
Förderung
- Shandong Provincial Natural Science Foundation
Zitieren
APA
Zhang, X., Lv, J., Fan, D., Feng, S., & Yu, S. (2025). Optimisation and Mechanical Behaviour Analysis of Splice Joints in Prefabricated H-Shaped Steel Beams. Buildings, 15(19), 3610. https://doi.org/10.3390/buildings15193610
Vancouver
Zhang X, Lv J, Fan D, Feng S, Yu S. Optimisation and Mechanical Behaviour Analysis of Splice Joints in Prefabricated H-Shaped Steel Beams. Buildings. 2025;15(19):3610. doi:10.3390/buildings15193610
BibTeX
@article{Zhang2025,
author = {Zhang, Xin and Lv, Jiahan and Fan, Dawei and Feng, Shuaike and Yu, Shenlu},
title = {Optimisation and Mechanical Behaviour Analysis of Splice Joints in Prefabricated H-Shaped Steel Beams},
journal = {Buildings},
year = {2025},
volume = {15},
number = {19},
pages = {3610},
doi = {10.3390/buildings15193610}
}
EUVIMED