Application of Integration of Transfer Learning and BIM Technology in Prefabricated Building Design Optimization
Buildings · 25.08.2025 · 15 (17) · 3029
DOI: 10.3390/buildings15173029 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 25.08.2025. Verfasst von Ting Ouyang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research on the Planning and Implementation of the New-type Productivity Development Strategy in Liuzhou City, Research on the Collaborative Innovation Model and Practice of Industry–University Research Application in Liuzhou, 2023 Liuzhou Institute of Technology specialized integration demonstration course construction project.
Abstract (Originalsprache)
With the continuous maturation of prefabricated buildings, the errors and efficiency issues in the design of prefabricated buildings have gradually drawn the attention of architectural designers. The characteristics of standardized design for prefabricated buildings also provide a foundation for the application of computer-learning methods in the field of architectural design, thereby improving design quality and efficiency. This study combined BIM technology to construct the information data on prefabricated buildings, applied the transfer-learning method to build the training model, and utilized the traditional architectural design collision concept to construct a prediction model applicable to the collision detection of prefabricated building design. The training set and test set were constructed in a 9:1 ratio, and the loss function and accuracy function were calculated. The error rate of the model was verified to be within 10% through trial calculations based on engineering cases. The results show that, in the selected engineering cases, the collision detection accuracy of the model reached 90.3%, with an average absolute error (MAE) of 0.199 and a root mean square error (RMSE) of 0.245. The prediction error rate was controlled within 10%, representing an approximately 65% improvement in efficiency compared to traditional manual inspections. This method significantly improves the efficiency and accuracy of collision detection, providing reliable technical support for the optimization of prefabricated building design.
Förderung
- Research on the Planning and Implementation of the New-type Productivity Development Strategy in Liuzhou City
- Research on the Collaborative Innovation Model and Practice of Industry–University Research Application in Liuzhou
- 2023 Liuzhou Institute of Technology specialized integration demonstration course construction project
- 2023 college students innovation and entrepreneurship training project
- 2024 Industry–University Cooperative Education Project of the Ministry of Education
- Guangxi University Middle-aged and Young Teachers’ Basic Research Capacity Enhancement Project for 2025
Zitieren
APA
Ouyang, T., Liu, F., Chen, L., Qin, D., & Li, S. (2025). Application of Integration of Transfer Learning and BIM Technology in Prefabricated Building Design Optimization. Buildings, 15(17), 3029. https://doi.org/10.3390/buildings15173029
Vancouver
Ouyang T, Liu F, Chen L, Qin D, Li S. Application of Integration of Transfer Learning and BIM Technology in Prefabricated Building Design Optimization. Buildings. 2025;15(17):3029. doi:10.3390/buildings15173029
BibTeX
@article{Ouyang2025,
author = {Ouyang, Ting and Liu, Fengtao and Chen, Lingling and Qin, Dongyue and Li, Sining},
title = {Application of Integration of Transfer Learning and BIM Technology in Prefabricated Building Design Optimization},
journal = {Buildings},
year = {2025},
volume = {15},
number = {17},
pages = {3029},
doi = {10.3390/buildings15173029}
}
EUVIMED