EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimizing Energy Performance of Phase-Change Material-Enhanced Building Envelopes Through Novel Performance Indicators

Abrar Ahmad, Shazim Ali Memon

Buildings · 29.07.2025 · 15 (15) · 2678

DOI: 10.3390/buildings15152678 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 29.07.2025. Verfasst von Abrar Ahmad und 1 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Nazarbayev University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Over recent decades, phase-change materials (PCMs) have gained prominence as latent-heat thermal energy storage systems in building envelopes because of their high energy density. However, only PCMs that complete a full daily charge–discharge cycle can deliver meaningful energy and carbon-emission savings. This simulation study introduces a methodology that simultaneously optimizes PCM integration for storage efficiency, indoor thermal comfort, and energy savings. Two new indicators are proposed: overall storage efficiency (ECn), which consolidates heating and cooling-efficiency ratios into a single value, and the performance factor (PF), which quantifies the PCM’s effectiveness in maintaining thermal comfort. Using EnergyPlus v8.9 coupled with DesignBuilder, a residential ASHRAE 90.1 mid-rise apartment was modeled in six warm-temperate (Cfb) European cities for the summer period from June 1 to August 31. Four paraffin PCMs (RT-22/25/28/31 HC, 20 mm thickness) were tested under natural and controlled ventilation strategies, with windows opening 50% when outdoor air was at least 2 °C cooler than indoors. Simulation outputs were validated against experimental cubicle data, yielding a mean absolute indoor temperature error ≤ 4.5%, well within the ±5% tolerance commonly accepted for building thermal simulations. The optimum configuration—RT-25 HC with temperature-controlled ventilation—achieved PF = 1.0 (100% comfort compliance) in all six cities and delivered summer cooling-energy savings of up to 3376 kWh in Paris, the highest among the locations studied. Carbon-emission reductions reached 2254 kg CO2-e year−1, and static payback periods remained below the assumed 50-year building life at a per kg PCM cost of USD 1. The ECn–PF framework, therefore, provides a transparent basis for selecting cost-effective, energy-efficient, and low-carbon PCM solutions in warm-temperate buildings.

Förderung

  • Nazarbayev University

Zitieren

APA

Ahmad, A., & Memon, S. A. (2025). Optimizing Energy Performance of Phase-Change Material-Enhanced Building Envelopes Through Novel Performance Indicators. Buildings, 15(15), 2678. https://doi.org/10.3390/buildings15152678

Vancouver

Ahmad A, Memon SA. Optimizing Energy Performance of Phase-Change Material-Enhanced Building Envelopes Through Novel Performance Indicators. Buildings. 2025;15(15):2678. doi:10.3390/buildings15152678

BibTeX
@article{Ahmad2025,
  author = {Ahmad, Abrar and Memon, Shazim Ali},
  title = {Optimizing Energy Performance of Phase-Change Material-Enhanced Building Envelopes Through Novel Performance Indicators},
  journal = {Buildings},
  year = {2025},
  volume = {15},
  number = {15},
  pages = {2678},
  doi = {10.3390/buildings15152678}
}
Kostenlos starten →