Quantifying Thermal Demand in Public Space: A Pedestrian-Weighted Model for Outdoor Thermal Comfort Design
Buildings · 20.06.2025 · 15 (13) · 2156
DOI: 10.3390/buildings15132156 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 20.06.2025. Verfasst von Deyin Zhang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
With accelerating urbanization, the outdoor thermal environment has become a critical factor affecting the thermal comfort of public spaces, particularly in high-density commercial districts and pedestrian-concentrated areas. To enhance thermal comfort and livability in public outdoor space, this study proposes a thermal demand-responsive design approach that integrates thermal conditions with pedestrian flow dynamics. A commercial pedestrian mall featuring semi-open public spaces and air-conditioned interior retail areas was selected as a case study. Computational Fluid Dynamics (CFD) simulations were conducted based on design-phase documentation and field measurements to model the thermal environment. The Universal Thermal Climate Index (UTCI) was employed to assess thermal comfort levels, and thermal discomfort was further quantified using the Heat Discomfort Index (HI). Simultaneously, pedestrian density distribution (λ) was analyzed using the agent-based simulation software MassMotion (Version 11.0). A demand of thermal comfort (DTC) index was developed by coupling UTCI-based thermal conditions with pedestrian density, enabling the spatial quantification of thermal demand across the whole commercial pedestrian mall. For example, in a sidewalk area parallel to the main street, several points exhibited high discomfort levels (HI = 0.95) but low pedestrian volume, resulting in DTC values approximately 0.2 units lower than adjacent zones with lower discomfort levels (HI = 0.7) but higher foot traffic. Such differences demonstrate how DTC can reveal priority areas for intervention. Key zones requiring thermal improvement were identified based on DTC values, providing a quantitative foundation for outdoor thermal environment design. This method provides both a theoretical foundation and a practical tool for the sustainable planning and optimization of urban public spaces.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zhang, D., Liu, G., Kang, K., Chen, X., Sun, S., Xie, Y., & Lin, B. (2025). Quantifying Thermal Demand in Public Space: A Pedestrian-Weighted Model for Outdoor Thermal Comfort Design. Buildings, 15(13), 2156. https://doi.org/10.3390/buildings15132156
Vancouver
Zhang D, Liu G, Kang K, Chen X, Sun S, Xie Y, et al. Quantifying Thermal Demand in Public Space: A Pedestrian-Weighted Model for Outdoor Thermal Comfort Design. Buildings. 2025;15(13):2156. doi:10.3390/buildings15132156
BibTeX
@article{Zhang2025,
author = {Zhang, Deyin and Liu, Gang and Kang, Kaifa and Chen, Xin and Sun, Shu and Xie, Yongxin and Lin, Borong},
title = {Quantifying Thermal Demand in Public Space: A Pedestrian-Weighted Model for Outdoor Thermal Comfort Design},
journal = {Buildings},
year = {2025},
volume = {15},
number = {13},
pages = {2156},
doi = {10.3390/buildings15132156}
}
EUVIMED