EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Application and Deformation Characteristics of Construction Waste Recycled Materials in Highway Subgrade Engineering

Yuan Mei, Hongping Lu, Xueyan Wang, Bingyu Zhou, Ziyang Liu, Lu Wang

Buildings · 06.03.2025 · 15 (5) · 835

DOI: 10.3390/buildings15050835 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 06.03.2025. Verfasst von Yuan Mei und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Henan Provincial Department of Housing and Urban-Rural Development Science and Technology Program Project (2023), Shaanxi Provincial Department of Education Local Service Special Scientific Research Program Project, Shaanxi Provincial Key Research and Development Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

It is difficult to meet environmental requirements via the coarse treatment methods of landfilling and open-air storage of construction waste. At the same time, the consumption of building materials in highway engineering is enormous. Using construction waste as a filling material for proposed roads has become a research hotspot in recent years. This paper starts with basic performance tests of recycled construction waste materials, and then moves on to laboratory experiments conducted to obtain the road performance of the recycled materials, the testing of key indicators of post-construction filling quality of the roadbed, and analyses of the deformation pattern of roadbed filled with construction waste. Additionally, the ABAQUS finite element software was used to establish a numerical model for roadbed deformation and analyze the roadbed deformation under different compaction levels and vehicle load conditions. The experimental results show that the recycled material has a moisture content of 8.5%, water absorption of 11.73%, and an apparent density of 2.61 g/cm3, while the liquid limit of fine aggregates is 20% and the plasticity index is 5.4. Although the physical properties are slightly inferior to natural aggregates, its bearing ratio (25–55%) and low expansion characteristics meet the requirements for high-grade highway roadbed filling materials. The roadbed layer with a loose compaction of 250 mm, after eight passes of rolling, showed a settlement difference of less than 5 mm, with the loose compaction coefficient stabilizing between 1.15 and 1.20. Finite element simulations indicated that the total settlement of the roadbed stabilizes at 20–30 mm, and increasing the compaction level to 96% can reduce the settlement by 2–4%. Vehicle overload causes a positive correlation between the vertical displacement and shear stress in the base layer, suggesting the need to strengthen vehicle load control. The findings provide theoretical and technical support for the large-scale application of recycled construction waste materials in roadbed engineering.

Förderung

  • Henan Provincial Department of Housing and Urban-Rural Development Science and Technology Program Project (2023)
  • Shaanxi Provincial Department of Education Local Service Special Scientific Research Program Project
  • Shaanxi Provincial Key Research and Development Program

Zitieren

APA

Mei, Y., Lu, H., Wang, X., Zhou, B., Liu, Z., & Wang, L. (2025). Study on the Application and Deformation Characteristics of Construction Waste Recycled Materials in Highway Subgrade Engineering. Buildings, 15(5), 835. https://doi.org/10.3390/buildings15050835

Vancouver

Mei Y, Lu H, Wang X, Zhou B, Liu Z, Wang L. Study on the Application and Deformation Characteristics of Construction Waste Recycled Materials in Highway Subgrade Engineering. Buildings. 2025;15(5):835. doi:10.3390/buildings15050835

BibTeX
@article{Mei2025,
  author = {Mei, Yuan and Lu, Hongping and Wang, Xueyan and Zhou, Bingyu and Liu, Ziyang and Wang, Lu},
  title = {Study on the Application and Deformation Characteristics of Construction Waste Recycled Materials in Highway Subgrade Engineering},
  journal = {Buildings},
  year = {2025},
  volume = {15},
  number = {5},
  pages = {835},
  doi = {10.3390/buildings15050835}
}
Kostenlos starten →